Improved Bend Over Sheave Durability of HMPE Ropes for Deep Sea Handling

Ocean wave power is a promising renewable energy source. It has, however, been difficult to find a cost-effective solution to convert wave energy into electricity. The harsh marine environment and the fact that wave power is delivered with large forces at low speed make design of durable mechanical structures and efficient energy conversion challenging. The dimensioning forces strongly depend on the wave power concept, the wave energy converter (WEC) implementation, and the actual power take-off (PTO) system. A WEC with a winch as a power take-off system, i.e., a winch-based point absorber (WBPA), could potentially enable a low levelized cost of energy (LCOE) if a low-cost, durable and efficient winch that can deal with peak loads can be developed. A key challenge for realizing such a winch is to find a force transmitting solution that can deal with these peak loads and that can handle up to 80 million cycles during its life. In this article, we propose a design solution for a force transmitting chain with elastomer bearings connecting the links of the chain. With this solution no sliding is present, and the angular motion is realized as elastic shear deformations in the elastomer bearings when the chain is wound onto the winch drum. The elastomer bearings were designed for low shear stiffness and high compression stiffness, and the links were designed primarily to minimize the number of joints in the chain. Thereby, the maximum allowed relative angle between the links when rolled up over the drum should be as large as possible within practical limits. Finite element-based topological optimization was performed with the aim to increase the link strength to weight ratio. A test rig for a first proof of concept testing has been developed, and preliminary test results indicate that this chain concept with elastomer bearings can be a potential solution for a durable chain and should be analyzed and tested further for fatigue and sea operations.

show abstract

A Flexible Chain Proposal for Winch Based Point Absorbers

Andersson

Hagnestål

Sellgren

2018

Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- And Nanosystems

View full text Add to dashboard Cite

Ocean wave power is a promising renewable energy source for future energy production. It has however been difficult to find a cost-effective solution to convert the wave energy into electricity. The harsh marine environment and the fact that wave power is delivered with high forces at low speeds makes design of durable mechanical structures and efficient energy conversion challenging. The dimensioning forces strongly depend on the wave power concept, the Wave Energy Converter (WEC) implementation and the actual Power Take-Off (PTO) system.A WEC using a winch as a Power Take-Off system, i.e. a Winch Based Point Absorber (WBPA), could potentially accomplish a low Levelized Cost Of Energy (LCOE) if a key component -a low-cost, durable and efficient winch that can deal with high loads -can be developed.A key problem for achieving a durable winch is to find a force transmitting solution that can deal with these high loads and handle up to 80 million cycles. In this article we propose a design solution for a force transmitting chain in a WBPA system where elastomeric bearings are used as a means to achieve the relative motion between the links in the chain. With this solution no sliding is present and the angular motion is achieved as a deformation in the elastomeric bearing when the chain is winded on a drum.The link was designed primarily to minimize the number of joints in the chain: Thereby the maximum allowed relative angle between the links when rolled up over the drum should be as large as possible within practical limits. The angle is to be handled by the elastomeric bearing. A detailed strength analysis of the link has been performed as well as topology optimization to increase the strength to weight ratio.A test rig for a first proof of concept testing has been developed and the first preliminary test results indicate that this concept with using elastomeric bearings can be a potential solution for a durable chain and should be analyzed further for fatigue conditions and under water operations.

show abstract

Improved Bend Over Sheave Durability of HMPE Ropes for Deep Sea Handling

Cited by 3 publications

References 7 publications

Experimental study on cyclic-bend-over-sheave (CBOS) characteristics of an HMPE fibre rope under dynamic loading

Experimental study on cyclic-bend-over-sheave (CBOS) characteristics of an HMPE fibre rope under dynamic loading

A Flexible Chain Proposal for Winch-Based Point Absorbers

A Flexible Chain Proposal for Winch Based Point Absorbers

Contact Info

Product

Resources

About