Importance of structures and interactions in ionic liquid-nanomaterial composite systems as a novel approach for their utilization in safe lithium metal batteries: A review

Kataria, Jyoti; Devi, Pooja; Rani, Pooja

doi:10.1016/j.molliq.2021.116736

Cited by 22 publications

(5 citation statements)

References 207 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The electrolyte reaction media considered to entrap metallic NPs into the carbon matrix have also captured great attention due to their high impact on the chemical properties, mechanical stability and compatibility with enhanced surface area and electrical properties [ 19 ]. Non-aqueous solvents may present some advantages compared to aqueous solvents [ 19 , 20 , 21 ], when the dispersibility and the electrochemical stability is taken into consideration [ 22 ]. Ionic liquids (ILs) present high production and purification costs, making these dense non-aqueous fluids less competitive when compared with traditional solvents.…”

Section: Introductionmentioning

confidence: 99%

Characterization of Carbon Nanomaterials Dispersions: Can Metal Decoration of MWCNTs Improve Their Physicochemical Properties?

et al. 2021

View full text Add to dashboard Cite

A suitable dispersion of carbon materials (e.g., carbon nanotubes (CNTs)) in an appropriate dispersant media, is a prerequisite for many technological applications (e.g., additive purposes, functionalization, mechanical reinforced materials for electrolytes and electrodes for energy storage applications, etc.). Deep eutectic solvents (DES) have been considered as a promising “green” alternative, providing a versatile replacement to volatile organic solvents due to their unique physical-chemical properties, being recognized as low-volatility fluids with great dispersant ability. The present work aims to contribute to appraise the effect of the presence of MWCNTs and Ag-functionalized MWCNTs on the physicochemical properties (viscosity, density, conductivity, surface tension and refractive index) of glyceline (choline chloride and glycerol, 1:2), a Type III DES. To benefit from possible synergetic effects, AgMWCNTs were prepared through pulse reverse electrodeposition of Ag nanoparticles into MWCNTs. Pristine MWCNTs were used as reference material and water as reference dispersant media for comparison purposes. The effect of temperature (20 to 60 °C) and concentration on the physicochemical properties of the carbon dispersions (0.2–1.0 mg cm−3) were assessed. In all assessed physicochemical properties, AgMWCNTs outperformed pristine MWCNTs dispersions. A paradoxical effect was found in the viscosity trend in glyceline media, in which a marked decrease in the viscosity was found for the MWCNTs and AgMWCNTs materials at lower temperatures. All physicochemical parameters were statistically analyzed using a two-way analysis of variance (ANOVA), at a 5% level of significance.

show abstract

Section: Introductionmentioning

confidence: 99%

Characterization of Carbon Nanomaterials Dispersions: Can Metal Decoration of MWCNTs Improve Their Physicochemical Properties?

et al. 2021

View full text Add to dashboard Cite

show abstract

“…In recent years, ionic liquids (ILs), a kind of molten ecofriendly salt, have received much attention in several areas of research. They are generally composed of organic cations and (in)organic anions and possess desirable characteristics, such as low melting points, high thermal stabilities, hydrophobicity, nonvolatility, good electrical conductivity, high polarity, and a wide range of electrochemical properties . Interestingly, changing the anionic and cationic species could provide the liquids with a particular functionality, making them suitable for various applications .…”

Section: Introductionmentioning

confidence: 99%

Design of [BmIm]₃PW₁₂O₄₀ Ionic Liquid Encapsulated-ZIF-8 Nanocomposite for Cationic Dye Adsorptive Removal: Modeling by Response Surface Methodology

Ranjbari

Ayati

Shahrak

et al. 2023

Ind. Eng. Chem. Res.

View full text Add to dashboard Cite

In this study, the modification of metal−organic frameworks with polyoxometalate-based ionic liquids was assessed and their efficient role in the improvement of their adsorption performance was studied. Metal−organic framework ZIF-8 was encapsulated with [BmIm] 3 PW 12 O 40 , a polyoxometalate-based ionic liquid, through reaction with the ZIF-8 imidazolate groups. The novel ZIF-8-[BmIm] 3 PW 12 O 40 nanocomposite was characterized using XRD, FTIR, SEM, EDX, and BET analyses, which confirmed the successful insertion of [BmIm] 3 PW 12 O 40 on the surface of the ZIF-8 structure. It was used to study the adsorptive removal of a methylene blue (MB) cationic dye model and showed high adsorption performance between pH 2 and 11 with an optimum sorbent dosage of 4 g/L. The adsorption kinetics corresponded well to the pseudo-second-order kinetic model. Moreover, response surface methodology was used to optimize experimental conditions and determine the highest MB removal percentage. The correlation between variables (time, pH, and sorbent dosage) and responses (removal percentage) were well fitted to the second-order polynomial model (R 2 = 0.949, Adj. R 2 = 0.9032, and pred. R 2 = 0.6129). The optimal conditions were found to be adsorbent amount = 0.04 g/L, pH = 11, and contact time = 45 min. Under these conditions, the highest removal percentage and amount of desirability were found to be 95.75% and 0.9, respectively.

show abstract

“…Ionic liquids are unique materials applied for protonconductive materials of polymer electrolyte membranes. [31,32] Notably, protic ionic liquid is a subclass of ionic liquid prepared by the neutralization of a Brønsted acid and a Brønsted base. [33] Recently, protic ionic liquids have attracted attention as a material for anhydrous proton conduction, and at the same time, they are expected to contribute to the realization of proton conduction in a low-humidity environment.…”

Section: Introductionmentioning

confidence: 99%

Facile Fabrication Technique of Polymeric Ionic Liquids‐Coated Core–Shell Nanoparticles for Polymer Electrolyte Membranes

Tabata,

Makino,

Matsuo

et al. 2023

Advanced Sustainable Systems

View full text Add to dashboard Cite

Nanoparticles and nanofibers are widely used as components of polymer electrolytes for membranes in fuel cells, and many surface modification methods are reported. However, some fabrication techniques are complicated, and it is necessary to develop a simplified and precise control method. Herein, a facile fabrication method is reported for core–shell nanoparticles hierarchically coated with polymeric ionic liquids (PIL) and hydrophobic polymers as a material for polymer electrolytes. A hierarchical polymer layer on the surface of the SiO2 nanoparticles is easily constructed by repeating the facile polymer‐coating technique based on precipitation polymerization several times. The highest proton conductivity of the core–shell nanoparticles is 1.3 × 10−2 S cm−1 at 80 °C and 95% relative humidity. Although the hydrophobic polymers coated as a protective layer reduce the proton conductivity, the formation of the PIL enhances the proton conductivity in various temperature and humidity environments. Therefore, the proposed method enables the facile fabrication of polymer layers with multiple functions, such as a proton‐conductive PIL layer and hydrophobic polymer layers as protective layers on the surface of the nanoparticles. Furthermore, they are expected to be applied to energy supply and gas separation, including polyelectrolytes, for the realization of a sustainable society.

show abstract

Importance of structures and interactions in ionic liquid-nanomaterial composite systems as a novel approach for their utilization in safe lithium metal batteries: A review

Cited by 22 publications

References 207 publications

Characterization of Carbon Nanomaterials Dispersions: Can Metal Decoration of MWCNTs Improve Their Physicochemical Properties?

Characterization of Carbon Nanomaterials Dispersions: Can Metal Decoration of MWCNTs Improve Their Physicochemical Properties?

Design of [BmIm]₃PW₁₂O₄₀ Ionic Liquid Encapsulated-ZIF-8 Nanocomposite for Cationic Dye Adsorptive Removal: Modeling by Response Surface Methodology

Facile Fabrication Technique of Polymeric Ionic Liquids‐Coated Core–Shell Nanoparticles for Polymer Electrolyte Membranes

Contact Info

Product

Resources

About

Importance of structures and interactions in ionic liquid-nanomaterial composite systems as a novel approach for their utilization in safe lithium metal batteries: A review

Cited by 22 publications

References 207 publications

Characterization of Carbon Nanomaterials Dispersions: Can Metal Decoration of MWCNTs Improve Their Physicochemical Properties?

Characterization of Carbon Nanomaterials Dispersions: Can Metal Decoration of MWCNTs Improve Their Physicochemical Properties?

Design of [BmIm]3PW12O40 Ionic Liquid Encapsulated-ZIF-8 Nanocomposite for Cationic Dye Adsorptive Removal: Modeling by Response Surface Methodology

Facile Fabrication Technique of Polymeric Ionic Liquids‐Coated Core–Shell Nanoparticles for Polymer Electrolyte Membranes

Contact Info

Product

Resources

About

Design of [BmIm]₃PW₁₂O₄₀ Ionic Liquid Encapsulated-ZIF-8 Nanocomposite for Cationic Dye Adsorptive Removal: Modeling by Response Surface Methodology