Implications of Testing a Zinc–Oxygen Battery with Zinc Foil Anode Revealed by Operando Gas Analysis

Abstract

Zinc−oxygen batteries are seen as promising energy storage devices for future mobile and stationary applications. Introducing them as secondary battery is hindered by issues at both the anode and cathode. Research efforts were intensified during the past two decades, mainly focusing on catalyst materials for the cathode. Thereby, zinc foil was almost exclusively used as the anode in electrochemical testing in the lab-scale as it is easy to apply and shall yield reproducible results. However, it is well known that zinc metal reacts with water within the electrolyte to form hydrogen. It is not yet clear how the evolution of hydrogen is affecting the performance results obtained thereof. Herein, we extend the studies and the understanding about the evolution of hydrogen at zinc by analyzing the zinc−oxygen battery during operation. By means of electrochemical measurements, operando gas analysis, and anode surface analysis, we elucidate that the rate of the evolution of hydrogen scales with the current density applied, and that the roughness of the anode surface, that is, the pristine state of the zinc foil surface, affects the rate as well. In the end, we propose a link between the evolution of hydrogen and the unwanted impact on the actual electrochemical performance that might go unnoticed during testing. Thereof, we elucidate the consequences that arise for the working principle and the testing of materials for this battery type.

Dendrite suppression by anode polishing in zinc-ion batteries

“…An unembellished, as-received Zn foil is still nonetheless the most commonly used anode in ZIB research, due to its simplicity and acceptance as a benchmark. 21 However, the use of these foils as a standard anode relies on the, somewhat unsubstantiated, assumption that Zn foils are consistent in structure and chemistry between suppliers or batches. 22 In fact, the surface properties of as-received Zn foil will vary greatly depending on its preparation method, roughness, presence of surface oxides/carbonates and more.…”

In-situ/operando characterization techniques in lithium-ion batteries and beyond

“…The DEMS confirmed that the charge-to-mass value stayed nearly 1.00 during the cycling operation, indicating a LiO 2 based reaction route. What's more, the employment of DEMS contributed to the development of mechanism and material exploration in other metal-air systems [195].…”

Efforts at Enhancing Bifunctional Electrocatalysis and Related Events for Rechargeable Zinc‐Air Batteries

“…The rate of HER was a function of applied current density and Zn anode surface area [41] Structured microporous Zn electrodes…”