Implementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage

Abstract

The proposed paper presents the DC/AC microgrid modeling using the Energy storage units and photovoltaic (PV) panels. The modal consists of a two stage power conversion. The power is supplied to the both DC and AC loads by this PV solar panels. The suitable way to explore the PV generation model is by using manufacturer datasheet. A bidirectional converter is connected to the battery storage system and dc bus. To keep the bus voltage stable, the storage system absorbs the excess power whenever generation is more and delivers power to the load when generation is less. This system eliminates hazards of islanding by supply the local loads continuously incase of grid discontinuity. This paper emphasizes on control and stability of dc bus voltage and energy management scheme. Matlab/Simulink is used for integration of system modeling and efficiency of the system is verified by simulation.

Seamless Transition in Grid-connected Microgrid System using Proportional Resonant Controller

“…The input voltage of the inverter is considered as a constant voltage and therefore, the control structure of the source side converter like a DC-DC boost converter [27,28] that may be required to increase and regulate the dc-link voltage in a PV based system is not discussed in this paper.…”

Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications

“…need interfacing converters which perform their charging and discharging properly. The interfacing converters employed for energy storage elements must be bidirectional to perform both charging and discharging operations [1][2][3][4][5].…”

A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control

“…Inverters are usually employed to interface DG units to the microgrid. As a result, they should be connected in parallel through the point of common coupling (PCC) which increases the reliability of the system by providing redundancy [1][2][3][4][5][6].…”