Implementation of Effective Fuel Saving Methodology for Turbines using Air Drag in Vehicles

Section: G) Mechanical Apparatus Frameworkmentioning

confidence: 99%

Underwater Welding techniques

Priya¹,

Mohan²,

Dhanasekar³

2019

“…Thus the filter, regulator and lubricator are always placed at the inlet side of the circuit they may be installed as a separate unit but most often it is placed as a combined unit. [1], [3], [5]…”

Section: Fig 6 Symbol Of the Frlmentioning

confidence: 99%

“…It is compressed with the help of compressor which increases the pressure of the air and the pressure can be adjusted by using pressure regulator. [1][2][3][4] Air is a mixture of gases . Standard air is a sea level air having a temperature of 20o C, pressure of 1.013bar and a relative humidity of 36%.…”

Section: Introductionmentioning

confidence: 99%

Design and Fabrication of Two Step Speed Control of a Cylinder Circuit using Pneumatics

Priya¹,

Dhanasekar²,

Mohan³

2019

The main aim of our project is to design and fabrication of pneumatic two step speed control of a cylinder. Initially the flow from the FRL retracts the cylinder when the push button is in its spring offset position. When it is pushed the flow pilots actuate. The air passes through the flow control and shuttle valve. Then the cylinder extends with high speed as the valve allows more air to enter the cylinder. When the piston reaches the position it operates the cam push button and pilot air flow through this and actuate 5/2 pilot operated valve and reaches flow control valve which permits less air. Then the flow through enters the shuttle valve to cylinder and allows the cylinder to extend at relatively low speed. At the end of extension stroke deactivating push button retracts the cylinder. Thus the speed of cylinder is controlled and project can be achieved

“…The aim of this project is to make a protection system in a helmet for a good safety of bike rider. [1], [3], [5] There is a PIC controller is utilized in this venture. Signal transmission between the protective cap unit and bicycle unit is utilizing a RF transmitter and beneficiary unit.…”

Section: Introductionmentioning

confidence: 99%

Smart Helmet using PIC Controller

Priya¹,

Dhanasekar²,

Vasumathi³

2019

These days head protectors that spares a huge number of life are disregarded by the bicycle riders prompts demise of numerous lives. So as to keep away from this situation we presented shrewd head protector utilizing pic controller. Signal transmission between the protective cap unit and bicycle unit is utilizing a RF transmitter and recipient unit. Giving wellbeing to an individual while riding the bicycle is our prime concern. By finishing this undertaking it will be obligatory to wear protective cap while riding. The framework what we have wanted to configuration gives answer for this issue of evasion in wearing headgear. This framework additionally gives security to the vehicle as each bicycle will have a one of a kind cap and without which an individual neglects to begin that specific bicycle. This venture incorporates a protective cap body and a coordinated electronic framework arranged in the head protector body. It is worked through a remote control systemMoreover, the parts are separated about the head protector to give even weight appropriation to advance generally speaking parity and wellbeing