Impedance Spectroscopy of Self-Assembled Monolayers on Au(111):  Evidence for Complex Double-Layer Structure in Aqueous NaClO₄ at the Potential of Zero Charge

Abstract

The impedance of a Au(111) electrode modified by three different self-assembled monolayers has been studied over a wide frequency range in aqueous NaClO4 solutions. The impedance characteristics of the bare electrode are compared with those of the same electrode modified with decanethiol, ω-hydroxydecanethiol, and 4‘-hydroxy-4-mercaptobiphenyl. In the case of the decanethiol system the interfacial impedance can be represented as a capacitor due to the self-assembled monolayer in series with the solution resistance. However, for the latter two systems, the impedance behavior is more complex with a high resistance in the monolayer parallel to the expected capacitance. This behavior is quite different than that discussed to date in the literature and assumed in the interpretation of voltammetric data for modified electrodes. The parameters for these systems are reported here as a function of electrolyte concentration at the point of zero charge on the bare Au(111). The consequences of the present observations are discussed with respect to the phenomena observed for these systems.

Electron Transfer Reactivity Patterns at Chemically Modified Electrodes: Fundamentals and Application to the Optimization of Redox Recycling Amplification Systems

“…A second strength of EIS lies in the ability to model physical processes using equivalent circuitry. In this way, more complex electrode mechanisms, electrodes that exhibit non uniform behavior across their surface and other novel phenomenon can be studied [89,[111][112][113][114]. There are also many other AC techniques [4,108].…”

Calculating average surface enhancement factors of randomly nanostructured electrodes by a combination of SERS and impedance spectroscopy

“…23,24 The area illuminated by the laser can be derived by multiplying the area of the laser spot with the roughness factor of the electrode. The focus of the laser at 514 nm using a 20Â objective has been determined previously to be 2 mm 2,5 resulting in an illuminated area of A 0 = 18.1 mm 2 .…”

Optimized nanoporous materials.

“…The sigmoidal shapes seen in this region may be attributable to the softness of the organic materials: subject to electrostatic force, slow conformational rearrangements may allow increased capacitance on longer timescales, causing the curve to droop slightly. [53] Figure 2-9. Nyquist plot of bare and hydroxy-C6-thiolated gold electrodes in 1M aqueous HClO 4 or tetramethylammonium lactate.…”