Impact of Geometry Parameters of a Sliding Surface of a Bearing on Tribological Characteristics of Sliding Bearings

Abstract

One of the characteristic parameters which is important for functioning of a journal bearing is relative clearance which has a direct impact on the bearing performance during an initial run-in period and standard operation. An equally important aspect is the proper selection of journal and bearing materials, as it ensures their proper cooperation, i.e., possibly low coefficient of friction, low resistance to motion and minimal wear. Another important issue is the geometry of the working surface of the bearing, i.e., giving it a proper shape by the use of lubricating microgrooves (micro-channels) which support the formation of an oil film. Forming a sliding surface in such a manner contributes to a better cooperation between the journal and the bearing. The paper presents the results of tribological tests, specifically the impact of the use of two types of lubricating microgrooves, made on the internal surface of the bearing on tribological characteristics. The tests were conducted for journal bearings composed of the bearing coated with casted SnSb12Cu6Pb alloy and the steel journal. During the tests, the friction torque, bearing temperature and voltage drop on the internal resistance of oil film were registered. As a result of the investigation, it was noticed that the use of rounded lubricating microgrooves has a positive effect on the tribological characteristics and can contribute to increasing the load-bearing capacity and durability of the journal bearings.Iran J Sci Technol Trans Mech Eng (2019) 43 (Suppl 1):S595-S602 https://doi.org/10.1007/s40997-018-0181-x( 012 3456789(). ,-volV) (0123456789().,-volV)

Experimental studies on viscosity, thermal and tribological properties of vegetable oil (kapok oil) with boric acid as an additive

“…Generally, lubricant plays a vital role in industrial and as well as in the machine components which are used to reduce the friction between the two contacts surfaces and also used to minimize the heat between the two surfaces [1]. The viscosity of the lubricant has a great influence on the quality of the lubrication of the machine components [2]. The liquid lubricants are classified into three types that is, synthetic, mineral and vegetable oil.…”

Friction and wear characteristics modification via laser surface textured grooves

“…The most common textures are of two types: micro-grooves, i.e. parallel grooves, hexagonal grooves, cross-hatched patterns [3] and micro-dimples, i.e. square, triangular, circular, ellipse and chevron [4].…”