Impact of environmental friendly machining on machinability: A review

Sharma, Rajeev; Jha, Bharat; Pahuja, Vipin

doi:10.1016/j.matpr.2020.12.498

Cited by 6 publications

(3 citation statements)

References 43 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Therefore, some noval ways are under progress to eliminate this problem of environment contamination which is mentioned below: -Dry machining -Cryogenic cooling -Coated tools -MQL There all techniques are in use at R&D stage and have some advantages and limitations as well as. Out of these methods, MQL technique is more users friendly and in practice to achieve eco-friendly sustainable manufacturing environment [18,19,20]. The objective of this paper is to explore the different applications of MQL techniques in machining of different engineering materials.…”

Section: Introductionmentioning

confidence: 99%

Environment Friendly Machining of Different Materials: A Review

Uddin Siddiqui,

Chait

2023

SKITRJ

View full text Add to dashboard Cite

Due to several regulations imposed by the National Green Tribunal (NGT) on dangerous emissions from industrial waste, environmentally friendly machining is becoming essential ingredient among industrial sector in a sustainable manner. This machining process is capable of significant reduction in waste by remanufacturing, reuse and recycling. This machining process covers an in-depth overview of these operations and practices which are most environmentally sustainable. In the paper different machining operations with applications of minimal quantity lubrication (MQL) are discussed for different engineering materials. This paper also enlighten on energy conservation during machining with useful data and results obtained under these Environment-friendly sustainable machining operations.

show abstract

Section: Introductionmentioning

confidence: 99%

Environment Friendly Machining of Different Materials: A Review

Uddin Siddiqui,

Chait

2023

SKITRJ

View full text Add to dashboard Cite

show abstract

“…Today's, because. of the ecological concerns, developing defilement and contamination guidelines, the interest for inexhaustible and biodegradable cutting liquids are expanding [2]. In machining, broad measure of metal working fluids (MWFs) has been utilized for oil and cooling approaches [3].…”

Section: Introductionmentioning

confidence: 99%

Role of Sustainable Techniques in Manufacturing Process: A Review

Sharma

Jha

Pahuja

2021

Int. J. Eng. Tech. Mgmt. Res.

Self Cite

View full text Add to dashboard Cite

This present research was on the comparison of the efficacious use of basalt and granite as coarse aggregates in concrete work. In order to obtain the basis for comparison, physical and structural tests were conducted on the different materials of the concrete and the concrete samples respectively. Physical test results revealed that basalt have a specific gravity of 2.8 and 2.5, while granite have a specific gravity of 2.9 and 2.6. In density, basalt have a density of 1554.55kg/m3 while granite had a density of 1463.64kg/m3. Aggregate impact test conducted on both aggregates revealed a percentage of 11.05% for basalt and 12.63% for granite. The following structural tests were carried out: compressive strength tests, flexural and tensile strength test and the comparative results are as follows. Compressive strength for basalt 36.39N/mm2 while 37.16N/mm2 for granite. 24.81N/mm2 tensile strength for basalt while 12.57N/mm2 for granite, 31.83N/mm2 flexural strength for basalt while 27.97N/mm2 for granite. From the above results, it can be deduced that basalt has higher strength properties than granite. Therefore, more suitable for coarse aggregate in achieving higher strength with some quantity of other composition of the concrete mix when compared to granite.

show abstract

“…Due to the environmental and health problems which are caused by using conventional cutting fluids in metal cutting operations, a new economical and practical approach cryogenic machining was developed [1]. In past, the conventional cooling technique is used in metal cutting process which is neither economical nor environmentally friendly [2], also conventional cutting fluids and dry machining failed to satisfy manufacturers requirement because some issue such as poor surface finish, low productivity and less tool life.…”

Section: …………………………………………………………………………………………………… Introduction:-mentioning

confidence: 99%

A Comprehensive Review on Evaluation of Environmental Friendly Machinability, Cutting Fluids and Techniques in Metal Cutting Operation

Sharma¹,

Jha²,

Pahuja³

2021

IJAR

Self Cite

View full text Add to dashboard Cite

Todays, due to the environmental concerns, growing contamination and pollution regulations, the demand for renewable and biodegradable cutting fluids is increasing day by day. Environmental friendly machining is one of the latest approach which is economical and also eco-friendly that improve the machinability. Different types of environmental friendly machining techniques are available e.g. MQL machining, cryogenic machining, dry machining and high pressure cooling approach. In this article, an attempt is made regarding environmental friendly machining processing, including different types of cutting fluids and machining techniques. The Knowledge of cutting fluid and its processing conditions is of critically importance to maximize the efficiency of cutting fluids in any machining process. In general, the generation of heat in the cutting zone due to friction at the tool-chip interface and the friction between the safety surface of the tool and the work piece is always the deciding factor on the quality of the work piece surface. In any manufacturing industries or company two factors play important role in machinability and productivity e.g. surface quality and tool wear. The main objective of this review article that analysis the different environmental friendly machining techniques and encourages the cooling approach in metal cutting operation. So finally, after the literature survey found that environmental friendly machining approach is cost effective machining process and also eco-friendly machining process.

show abstract

Impact of environmental friendly machining on machinability: A review

Cited by 6 publications

References 43 publications

Environment Friendly Machining of Different Materials: A Review

Environment Friendly Machining of Different Materials: A Review

Role of Sustainable Techniques in Manufacturing Process: A Review

A Comprehensive Review on Evaluation of Environmental Friendly Machinability, Cutting Fluids and Techniques in Metal Cutting Operation

Contact Info

Product

Resources

About