Identification and Analysis of Corrosion Mechanisms for Ground Pipelines with Hanging Rings

Abstract

Recently, corrosion perforation has been frequently seen in surface pipelines in the oil and gas industry, resulting in operational and environmental challenges. Due to the complex characteristics and mechanisms of such corrosion, a new and pragmatic method has been designed to identify and evaluate the corrosion phenomenon via a hanging ring installed in a surface pipeline. In addition to respectively analyzing the ions of water samples with chemical titration, ion chromatography, and mass spectrometry, the micro-surface morphology of the corroded hanging rings was observed and evaluated by using a scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS), and the surface composition of the corroded hanging rings was analyzed by using X-ray diffraction (XRD). The water ions of each selected position were found to mainly contain Ca2+, Ba2+, SO42−, and HCO3−, while the barium scale and calcium carbonate scale were formed in situ. In addition to the common corrosion induced by CO2, corrosion induced by both CO2 and H2S leads to extremely serious corrosion and scaling in surface pipelines. In addition, the injection dose of corrosion inhibitor was also evaluated.

Study on the Wear Performance and Wear Prediction of Leaf Spring Calipers under Lubricating Medium Conditions

“…Oil transport pipelines have rapidly gained popularity and formed a worldwide oil transport network [7]. With the increase in the service life of oil pipelines, the aging of pipeline infrastructure is obvious, including corrosion, creep, deformation, and cracking [8][9][10][11]. Oil pipelines are often buried underground or placed in locations that are difficult for maintenance personnel to reach, such as the seabed.…”