Icing Wind Tunnel and Erosion Field Tests of Superhydrophobic Surfaces Caused by Femtosecond Laser Processing

Abstract

Ice accumulation on lift-generating surfaces, such as rotor blades or wings, degrades aerodynamic performance and increases various risks. Active measures to counteract surface icing are energy-consuming and should be replaced by passive anti-icing surfaces. Two major categories of surface treatments—coating and structuring—already show promising results in the laboratory, but none fulfill the current industry requirements for performance and durability. In this paper, we show how femtosecond laser structuring of stainless steel (1.4301) combined with a hydrocarbon surface treatment or a vacuum treatment leads to superhydrophobic properties. The anti-ice performance was investigated in an icing wind tunnel under glaze ice conditions. Therefore, flexible steel foils were laser-structured, wettability treated and attached to NACA 0012 air foil sections. In the icing wind tunnel, hydrocarbon treated surfaces showed a 50 s ice build-up delay on the leading edge as well as a smoother ice surface compared to the reference. To demonstrate the erosion resistance of these surfaces, long-term field tests on a small-scale wind turbine were performed under alpine operating conditions. The results showed only minor erosion wear of micro- and nano-structures after a period of six winter months.