Hydrothermal carbonization of sugar beet pulp: optimization and characterization

Abstract

In this study, the optimum hydrothermal conditions of sugar beet pulp were investigated by Response Surface Methodology (RSM) based on Central Composite Design (CCD). The hydrochar obtained from sugar beet pulp (SBP) was optimized for maximum yield and carbon content. Process conditions were chosen with reaction temperatures of 200–240 °C, residence time 60–150 min, and biomass to water ratio of 1:3–1:10. The yield and carbon content of the hydrochar varied with the process parameters. In order to obtain hydrochar with the highest yield and carbon content in optimization, the reaction temperature should be 220.74 °C, the biomass to water ratio should be 1:3, and the residence time should be 95.58 min. High heating value, energy and mass yield, and energy densification ratio of sugar beet pulp and hydrochar were also investigated. The products were characterized using FT-IR, SEM, and ultimate analysis techniques. The Coats-Redfern method was used to estimate the kinetic parameters of the combustion processes. The activation energy values of SBP and SBP-HC products were calculated as 13.88 and 11.46 kJ/mol, respectively. The kinetic data were used to determine the thermodynamic parameters (ΔH, ΔG, and ΔS). As a result, the properties of hydrochar produced from sugar beet pulp under optimum conditions have been extensively investigated and the results have shown that hydrochar has potential for use in different areas.