Hybrid Zinc Oxide Conjugated Polymer Bulk Heterojunction Solar Cells

Abstract

Bulk heterojunction photovoltaic devices based on blends of a conjugated polymer poly[2-methoxy-5-(3‘,7‘-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO−PPV) as electron donor and crystalline ZnO nanoparticles (nc-ZnO) as electron acceptor have been studied. Composite nc-ZnO:MDMO−PPV films were cast from a common solvent mixture. Time-resolved pump−probe spectroscopy revealed that a photoinduced electron transfer from MDMO−PPV to nc-ZnO occurs in these blends on a sub-picosecond time scale and produces a long-lived (milliseconds) charge-separated state. The photovoltaic effect in devices, made by sandwiching the active nc-ZnO:MDMO−PPV layer between charge-selective electrodes, has been studied as a function of the ZnO concentration and the thickness of the layer. We also investigated changing the degree and type of mixing of the two components through the use of a surfactant for ZnO and by altering the size and shape of the nc-ZnO particles. Optimized devices have an estimated AM1.5 performance of 1.6% with incident photon to current conversion efficiencies up to 50%. Photoluminescence spectroscopy, atomic force microscopy, and transmission electron microscopy have been used to gain insight in the morphology of these blends.

Series vs parallel connected organic tandem solar cells: Cell performance and impact on the design and operation of functional modules

“…The resulting film was dried on a hotplate for 10 min at 70 1C. The intermediate layer was processed as before from a ZnO nanoparticles dispersion [10]. The ZnO layer was spun from a solution of 10 mg mL À 1 ZnO NP from isopropanol on top of the dried PCDTBT active layer.…”

Visible-induced photocatalytic reactivity of polymer–sensitized titania nanotube films

“…In general, they are also efficient electron donors and good hole transporters upon visible light excitation [8]. Recently, conjugated polymers act as stable photosensitizers combined with wide band gap inorganic semiconductors (e.g., TiO 2 , ZnO, CdSe and CdTe) is an emerging area of research for optical, electronic, and photoelectric 3 conversion applications [9][10][11]. In a conjugated polymer/TiO 2 system, polymer, bound to TiO 2 , can actively harvest the visible light matching the semiconductor energy levels, and then inject electrons into the conduction band (CB) of TiO 2 .…”

High work function transparent middle electrode for organic tandem solar cells

“…In the single junction cell and the front subcell of the double junction device, the active layers were applied on electronic grade PEDOT:PSS ͑Clevios VP AI4083, H.C. Starck͒. To form the interlayer in the double junction configuration, an 18 mg/mL acetonic dispersion of ZnO nanoparticles, synthesized as described elsewhere, 5,6 and a modified PH500:DMAE dispersion at pH 3.4 ͑hereaf-ter referred to as M-PH500͒ were subsequently spin coated in air on top of the front P3HT:PCBM layer. Both interlayers were approximately 30 nm thick.…”