Hybrid integrated tunable optical transmitter subsystem on a chip

Abstract

The need for tunable optical transmitters in optical networking is growing at a rapid rate. A tunable optical transmitter is the combination of a tunable laser, an isolator, and a modulator. Although today lasers and modulators could be integrated together on a single chip, an integrated component of this type would not be useful because the absence of an isolator between the two elements would cause optical reflections to reach the laser, leading to a high level of frequency chirp and relaxation oscillations. Therefore discrete external modulators are used, and lasers are coupled to them through discrete optical isolators. We report on recent developments in integrated active, thermo-optic, magneto-optic and electro-optic technologies that enable the production of a fully integrated tunable transmitter. This transmitter consists of a planar polymer waveguide circuit that is built on a silicon chip and in which films of a variety of materials are embedded. This subsystem on a chip includes a laser chip coupled to a thermo-optically tunable planar polymeric filter resulting in a tunable external cavity laser; an integrated magneto-optic isolator consisting of a planar polymer waveguide with inserted thin films of yttrium iron garnet for Faraday rotation, crystal ion sliced LiNbO 3 for half-wave retardation, and polarizers; and an electro-optic modulator consisting of a crystal ion sliced LiNbO 3 thin film patterned with a Mach-Zehnder interferometer and grafted into the polymer circuit, capable of operating with less than 5 Volts at modulation speeds up to 40 GHz.

Hybrid integration platform for planar lightwave subsystems

“…37 It consists of an active element (laser chip), thermooptic elements (a phase controller and a tunable filter), a magneto-optic element (isolator), and an electro-optic element (modulator). A block-diagram schematic of the integrated circuit is shown in Fig.…”

Toward the optoelectronic ULSI: drivers and barriers

“…36 It consists of an active element (laser chip), thermo-optic elements (a phase controller and a tunable filter), a magneto-optic element (isolator), and an electro-optic element (modulator). A block-diagram schematic of the integrated circuit is shown in Fig.…”

Hybrid integrated photonic components based on a polymer platform

“…26 It consists of an active element (laser chip), thermo-optic elements (a phase controller and a tunable filter enabling tuning of the laser through a tunable external cavity), a magneto-optic element (optical isolator), and an electro-optic element (modulator). The entire circuit is built into our polymer platform.…”