Hybrid controller design using gain scheduling approach for compressor systems

Abstract

<span>The automatic control system plays a crucial role in industries for controlling the process operations. The automatic control system provides a safe and proper controlling mechanism to avoid environmental and quality problems. The control system controls pressure flow, mass flow, speed control, and other process metrics and solves robustness and stability issues. In this manuscript, The Hybrid controller approach like proportional integral (PI) and proportional derivative (PD) based fuzzy logic controller (FLC) using with and without gain scheduling approach is modeled for the compressor to improve the robustness and error response control mechanism. The PI/PD-based FLC system includes step input function, the PI/PD controller, FLC with a closed-loop mechanism, and gain scheduler. The error signals and control response outputs are analyzed in detail for PI/PD-based FLC’s and compared with conventional PD/PID controllers. The PD-based FLC with the Gain scheduling approach consumes less overshoot time of 74% than the PD-based FLC without gain scheduling approach. The PD-based FLC with the gain scheduling approach produces less error response in terms of 7.9% in integral time absolute error (ITAE), 7.4% in integral absolute error (IAE), and 16% in integral square error (ISE) than PD based FLC without gain scheduling approach.</span>

Low-cost portable throttle curve manipulator for smooth initial movement of an electric vehicle

“…The electric vehicle will experience a high impulse, which results in a sudden jump during initial movement. Slowing down the motor response to avoid the sudden jump is not suggested by a previous study [27]. Instead, the motor should respond quickly and accurately to avoid stability issues during operation.…”