Hot-Melt Extrusion as an Advantageous Technology to Obtain Effervescent Drug Products

Abstract

Here, we assessed the feasibility of hot-melt extrusion (HME) to obtain effervescent drug products for the first time. For this, a combined mixture design was employed using paracetamol as a model drug. Extrudates were obtained under reduced torque (up to 0.3 Nm) at 100 °C to preserve the stability of the effervescent salts. Formulations showed vigorous and rapid effervescent disintegration (<3 min), adequate flow characteristics, and complete solubilization of paracetamol instantly after the effervescent reaction. Formulations containing PVPVA in the concentration range of 15–20% m/m were demonstrated to be sensitive to accelerated aging conditions, undergoing marked microstructural changes, since the capture of water led to the agglomeration and loss of their functional characteristics. HPMC matrices, in contrast, proved to be resistant to storage conditions in high relative humidity, showing superior performance to controls, including the commercial product. Moreover, the combined mixture design allowed us to identify significant interactions between the polymeric materials and the disintegrating agents, showing the formulation regions in which the responses are kept within the required levels. In conclusion, this study demonstrates that HME can bring important benefits to the elaboration of effervescent drug products, simplifying the production process and obtaining formulations with improved characteristics, such as faster disintegration, higher drug solubilization, and better stability.

Continuous Manufacture and Scale-Up of Theophylline-Nicotinamide Cocrystals

“…In another study, Dhumal et al emphasized the importance of screw configuration in regards to extrusion processing, though once a suitable configuration was established, did not find it to be a significant factor in the scale-up of production [ 36 ]. Screw speed must also be increased with the feed rate, otherwise, the extruder will clog [ 41 , 42 ].…”

A Comprehensive Review on Effervescent Tablets

“…Dry granulation techniques, such as hot melt granulation 77,78 , can be used as an alternative to wet granulation. In hot melt granulation, hydrated citric acid is melted to release the hydration water that serves as the granulating liquid, agglomerating the powder mixer's particles.…”