Hot Deformation Behavior and Microstructure Evolution of 2219/TiB2 Al-matrix Composite

Abstract

Hot compression tests for 2219/TiB 2 Al-matrix composite were conducted on a Gleeble-3500 isothermal simulator in the temperature range of 300~500°C and strain rates of 0.01, 0.1, 1, 10s -1 to obtain true stress strain curves. The original Johnson-Cook model was calculated and used to describe the constitutive relationship of hot deformation behavior of this composite. After precision evaluation and analysis, a new modified Johnson-Cook model was proposed. Comparing with the original model, the new model has a lower absolute average relative error (AARE) of 6.4415% and a higher relative error (R) of 0.9852, which indicates better prediction precision. Meanwhile, to understand the intrinsic workability of this composite, processing map based on dynamic materials model was constructed. Two stable regions locating at 300~400°C&0.01~0.1s -1 and 420~500°C &0.01~1s -1 were identified by the processing map and the instable microstructure in the instability region validated the reliability of the processing map. Furthermore, the microstructure evolution was analyzed and the results revealed that the θ-phase reduced with the increasing temperature.