Holistic simulation of wind turbines with fully aero-elastic and electrical model

Abstract

Requirements for the design of wind turbines advance facing the challenges of a high content of renewable energy sources in the public grid. A high percentage of renewable energy weaken the grid and grid faults become more likely, which add additional loads on the wind turbine. Load calculations with aero-elastic models are standard for the design of wind turbines. Components of the electric system are usually roughly modeled in aero-elastic models and therefore the effect of detailed electrical models on the load calculations is unclear. A holistic wind turbine model is obtained, by combining an aero-elastic model and detailed electrical model into one co-simulation. The holistic model, representing a DFIG turbine is compared to a standard aero-elastic model for load calculations. It is shown that a detailed modelling of the electrical components e.g., generator, converter, and grid, have an influence on the results of load calculations. An analysis of low-voltage-ride-trough events during turbulent wind shows massive increase of loads on the drive train and effects the tower loads. Furthermore, the presented holistic model could be used to investigate different control approaches on the wind turbine dynamics and loads. This approach is applicable to the modelling of a holistic wind park to investigate interaction on the electrical level and simultaneously evaluate the loads on the wind turbine.

Wind Turbines Control Trends and Challenges: An Overview

“…India's VRE generation capacity was 7.7 percent in 2017 and 2018 and was on track to meet the 2019 goal of 9 percent. In 2017, 76 percent of the United States' electricity was generated by wind and solar power [19].…”

“…The electric pitch controller is more suitable for use in cooler climates. As temperature drops, the viscosity of hydraulic oil falls [16]; [19]; [21]; [45].…”