High Power Cathodes from Poly(2,2,6,6-Tetramethyl-1-Piperidinyloxy Methacrylate)/Li(NixMnyCoz)O2 Hybrid Composites

Abstract

Lithium-ion batteries are today among the most efficient devices for electrochemical energy storage. However, an improvement of their performance is required to address the challenges of modern grid management, portable technology, and electric mobility. One of the most important limitations to solve is the slow kinetics of redox reactions associated to inorganic cathodic materials, directly impacting on the charging time and the power characteristics of the cells. In sharp contrast, redox polymers such as poly(2,2,6,6-tetramethyl-1-piperidinyloxy methacrylate) (PTMA) exhibit fast redox reaction kinetics and pseudocapacitors characteristics. In this contribution, we have hybridized high energy Li(NixMnyCoz)O2 mixed oxides (NMC) with PTMA. In this hybrid cathode configuration, the higher voltage NMC (ca. 3.7 V vs. Li/Li+) is able to transfer its energy to the lower voltage PTMA (3.6 V vs. Li/Li+) improving the discharge power performances and allowing high power cathodes to be obtained. However, the NMC-PTMA hybrid cathodes show an important capacity fading. Our investigations indicate the presence of an interface degradation reaction between NMC and PTMA transforming NMC into an electrochemically dead material. Moreover, the aqueous process used here to prepare the cathode is also shown to enable the degradation of NMC. Indeed, once NMC is immersed in water, alkaline surface species dissolve, increasing the pH of the slurry, and corroding the aluminum current collector. Additionally, the NMC surface is altered due to delithiation which enables the interface degradation reaction to take place. This reaction by surface passivation of NMC particles did not succeed in preventing the interfacial degradation. Degradation was, however, notably decreased when Li(Ni0.8Mn0.1Co0.1)O2 NMC was used and even further when alumina-coated Li(Ni0.8Mn0.1Co0.1)O2 NMC was considered. For the latter at a 20C discharge rate, the hybrids presented higher power performances compared to the single constituents, clearly emphasizing the benefits of the hybrid cathode concept.