High-efficiency ballistic electrostatic generator using microdroplets

Abstract

The strong demand for renewable energy promotes research on novel methods and technologies for energy conversion. Microfluidic systems for energy conversion by streaming current are less known to the public, and the relatively low efficiencies previously obtained seemed to limit the further applications of such systems. Here we report a microdropletbased electrostatic generator operating by an acceleration-deceleration cycle ('ballistic' conversion), and show that this principle enables both high efficiency and compact simple design. Water is accelerated by pumping it through a micropore to form a microjet breaking up into fast-moving charged droplets. Droplet kinetic energy is converted to electrical energy when the charged droplets decelerate in the electrical field that forms between membrane and target. We demonstrate conversion efficiencies of up to 48%, a power density of 160 kW m À 2 and both high-(20 kV) and low-(500 V) voltage operation. Besides offering striking new insights, the device potentially opens up new perspectives for low-cost and robust renewable energy conversion.

Isobaric Expansion Engines: New Opportunities in Energy Conversion for Heat Engines, Pumps and Compressors

“…Examples include a direct conversion of pressure to electricity by means of a piezoelectric pressure-to-electricity transmitter [43][44][45], different electrokinetic effects associated with electricity generation by forcing liquids through membranes [46,47], electrohydrodynamic electrostatic generators [48], reverse electrowetting [49], etc. All these methods make it possible to eliminate electric alternators, as well as to decrease the number of moving parts of the machines.…”

High Electrokinetic Energy Conversion Efficiency in Charged Nanoporous Nitrocellulose/Sulfonated Polystyrene Membranes

“…Electrokinetic energy conversion (EKEC) in nanofluidic channels showed an efficiency of 3%, 8 and in a recent study on a ballistic electrostatic generator a very high efficiency of almost 50% was achieved. 5 In the current Letter, we report on the EKEC in charged nanoporous polymer membranes. The basic energy conversion principle is schematically explained in Figure 1.…”

Paper-Based Origami Triboelectric Nanogenerators and Self-Powered Pressure Sensors

“…[9][10][11][12] Among them, TENGs have been proven as one of cost-effective and robust approaches for harvesting ambient mechanical energy. [13][14][15][16][17] The operating principle of TENG is based on the periodical contact and separation of two different materials that have opposite triboelectric polarities.…”