Heat transfer evaluation of metal oxides based nano-PCMs for latent heat storage system application

Abstract

This article is focused on numerical analyses of commercially available metal-oxides as potential nano-additives for paraffin in thermal storage applications. Technical and economic prospects of metal-oxides based nano-PCMs are evaluated to help formulate selection criterion for nano-additives to achieve optimum thermal performance at acceptable cost. Numerical model based on enthalpy-porosity technique is developed which incorporates natural convection and transient variations in thermo-physical properties of nano-PCM. Numerical model is simulated for charging and discharging cycles of nano-PCMs in shell and tube heat exchanger at controlled temperatures. Transient simulations help in analysing heat transfer categorisation and isotherms distributions, solid-liquid interfaces propagations, charging and discharging rates, and overall thermal enthalpy. Inclusion of nano-particles increase the effective thermal conductivity and surface area for heat transfer, which results in enhanced charging and discharging rates. The conductive heat transfer, peak heat flux, charging and discharging rates are significantly enhanced by increasing volume concentration of nano-particles. The percentage enhancement in charging rates of SiO 2 based nano-PCM samples with 1% and 5% are 29.45% and 41.04%, respectively. Likewise, the discharging rates are improved by 21.09% and 30.08%, respectively. However, an increase in volume concentration reduces natural convection and overall thermal enthalpy, and increases total cost of nano-PCM. For instance, the percentage reductions in total enthalpy of CuO based nano-PCM samples with 1% and 5% volume concentrations are 8.01% and 32.14%, respectively. Likewise, the total costs are increased from 14.26 €/kg for base paraffin to 70.89-309.33 €/kg, respectively. Hence, the significance and originality of this research lies within evaluation and identification of preferable metal-oxides with higher potential for improving thermal performance at reasonable cost. This article will help bring significant impact to large-scale utilisation of low-carbon and clean energy technology in domestic and commercial applications.

Effect of Nano-Sized Heat Transfer Enhancers on PCM-Based Heat Sink Performance at Various Heat Loads

“…The only drawback of these materials is their low thermal conductivity (0.14-0.5 W/(m•K)) [5], due to which, in consequence, they are not used in their pure form. Such a material can be used in combination with various heat transfer enhancers, mainly using high-conductivity metal radiators with immersed metal foams, matrixes, or the addition of highly heat-conducting particles [3,[6][7][8][9].…”

“…Currently, there are many investigations devoted to the stability of NePCMs [12,[14][15][16][17][18][19]. In addition, there are various surfactants for nanoparticles ensuring the stability of suspensions for a sufficiently long time [7,13,20].…”

“…It is known that the addition of nanoparticles raises the thermal conductivity of the material [7,13,20]. Thermophysical properties of n-octadecane with the addition of TiO 2 nanoparticles were experimentally measured by Motahar et al [21].…”

“…The ability of PCMs to accumulate and release energy when a certain temperature is reached to change properties under various thermal influences can be used in many engineering fields; for example, in latent heat thermal storages, constructions, solar collectors, or metasurfaces [6,7,[23][24][25][26][27][28][29][30][31][32]. Using PCM can reduce daily room temperature fluctuations, reduce air conditioning costs at high heat exposure, and solar radiation.…”

Thermal Storage and Release Features of Electric Thermal Storage Heating Systems with Solid Storage Material

“…Tian et al [4] simulated the effective thermal conductivity of an autoclave aerated concrete (AAC). Ranjha et al [5][6][7][8][9][10] studied the combination of different thermal storage materials and their heat storage capacities. Rao et al [11][12][13][14][15] investigated the heat convection of the air on solid surfaces.…”