Harmonic by harmonic removal technique for improving vibroseis data quality

Abstract

In this paper, an improved method is presented to reduce vibrator harmonic distortion, one harmonic at a time and the method is illustrated with both simulated and field data. This method improves on the previous method that treated all the harmonics at once. The significant contribution in this procedure is a considerable reduction for the harmonics without any alteration for the weakest signals possibly present in positive and negative times. The core of the proposed technique depends on an accurate simulation for all the harmonics one by one existing in the positive and negative times of the data after cross‐correlation with the fundamental sweep and then subtracting the simulated harmonics from the original data using an optimization procedure. The steps and mathematical equations of the procedure are explained in detail in the body of the article in the section titled ‘harmonic by harmonic attenuation procedure’. Accordingly, a well‐developed procedure for enhancing the vibroseis data quality in both down‐ and up‐sweep data is illustrated. The procedure was tested on both synthetic and field data sets.

An effective method for reducing harmonic distortion in correlated vibroseis data

“…In this paper, we propose an improved method for reducing the harmonics in the correlated and truncated vibroseis seismic data based on the method proposed by El-Aal and Khairy (2011). First of all, the first step is decomposition of the ground force signal.…”

Optimization‐based recursive filtering for separation of signal from harmonics in vibroseis

“…An alternative technique for suppressing harmonics is proposed by Abd El‐Aal (2011). Using a special algorithm, the windows with the strongest signal amplitudes are detected.…”