Hardness and Microstructure Homogeneity of Pure Copper and Iron-Chromium Alloy Processed by Severe Plastic Deformation

Abstract

Hardness and microstructure homogeneity of pure copper and iron-chromium alloy processed by severe plastic deformation (SPD) were investigated in grain refinement. Equal channel angular pressing (ECAP) is one of the well-known techniques of the SPD technique due to their up-scale ability and other methods. SPD was applied to pure copper and iron-chromium alloy at comparable temperatures up to four passes. The microstructure and microhardness were observed and measured in the transverse plane for each billet. The homogeneity observation was carried out from the sub-surface until in the middle of the billet. The result showed that the deformed structure appeared adequately after the first pass and had a higher hardness level. The first pass showed a higher inhomogeneity factor than the fourth pass due to the homogeneity microstructure. The hardness also showed homogeneous value along the transverse plane, and it was concluded that ECAP could achieve complete homogeneity in grain refinement