Hardening Mechanism of Coral Aggregates in Cement-Based Systems

Abstract

In terms of the infrastructure construction near coral reefs, native coral aggregates have been widely implemented as alternative efficient building materials to prepare the “coral concrete”. This study focused on the mechanical properties and hardening mechanism of coral particles under cement-based systems. Firstly, coral particles were divided into two categories: coral biological debris particles (calcium sand) and coral parent rock particles (limestone). Subsequently, several elementary laboratory tests were conducted to compare the physical and chemical properties of the samples. The results demonstrate that the specific surface area and open pores of coral particles are bigger than those of quartz sand. Moreover, the water absorption rate of debris and parent rock particles reach 9.9% and 22%, respectively. To further examine the hardening mechanism of coral particles, we carried out particle crushing strength tests, compressive strength tests and nanoindentation tests. Regardless of the tested groups and particle categories, the results show that the wrapped cement slurry universally demonstrated the successful enhancement of crushing strength σ0,d. Particularly, in the size range from 1.18–2.36 mm, wrapped particles of debris and parent rock both reached unusually high σ0,d values: 10.14 MPa and 8.74 MPa, respectively. However, in the size range from 9.5 mm to 16 mm, the σ0,d values of wrapped debris and parent rock reached 4.75 MPa and 3.18 MPa, respectively. According to the nanoindentation tests, the sub-microscopic strength of ITZs was enhanced to more than 1 GPa, which is higher than that of conventional concrete, in terms of the sample with 28-day maintenance. In conclusion, this study has provided a further basis for studying coral concrete material and its hardening mechanism.

Experimental Study on Basic Mechanical Properties of PVA Fiber-Reinforced Coral Cement-Based Composites

“…Its particles are irregular in shape and prone to breakage, and it has abundant pores its surface and inside. The physical properties of coral sand are completely different from those of terrestrial sand [ 5 , 6 ]. Therefore, the porosity of the coral concrete prepared by conventional methods is as high as approximately 20%, which is obviously higher than that of ordinary sand concrete.…”