Growth study of nanoscale Re–Ni coatings on functionalized SiO2 using electroless plating

The effect of SiO2 nanoparticles dispersion on physico-chemical properties of modified Ni–W nanocomposite coatings

“…Indeed, this peak was less intensive and appeared only for the XRD spectrum of Ni-W/SiO 2 nanocomposite alloy obtained at pH 4. In literature [35][36][37], the change of preferred orientation of Ni signifies an incorporation of particles into crystal lattices. This result confirmed that nano-SiO 2 has been not only homogeneously incorporated into Ni-W nanocomposite alloy (Fig.…”

Electroless plating of rhenium-based alloys with nickel, cobalt and iron

“…It should be noted that, to the best of our knowledge, electroless deposition of Re-Fe alloys has not been reported yet. In this work we propose to apply the recently reported procedure for Re-Ni electroless deposition [19] to prepare high Re-content films with Co, Ni and Fe.…”

“…The induced co-deposition of Re with Ni by electroless plating has been recently investigated in our group. In our previous study, films with high Re-content (>80 at.%) were deposited on Cu and SiO 2 substrates [18,19]. It was shown that addition of Ni 2+ ions to the plating bath is required to start the induced co-deposition of Re.…”

Electroless Plating of Ni-P-W Coatings Containing Scattered Nb2O5 on Sintered NdFeB Substrate

“…In addition, the Ni-P coatings containing fine dispersed ceramic particles have also attracted a great deal of attention in industrial area [13][14][15][16] . Some research results indicated that a combination of dissimilar materials, such as distributed nano-Al 2 O 3 , SiC, ZrO 2 , CeO 2 or Si 3 N 4 particles, can produce a coating with good chemical, mechanical, electrical, and optical properties [17][18][19][20][21][22][23] . Sintered NdFeB permanent magnet has a substantial drawback in corrosion resistance.…”