Grinding Performance Integrated Experimental Evaluation on Alumina Ceramics with Leaf-Vein Bionic Grinding Wheel

Abstract

In order to enhance the grinding performance of alumina ceramic materials, the surface of the grinding wheels are ablated by laser radiation before grinding, and the three types of leaf-vein bionic grinding wheels with different micro-groove pitches are formed to compare the grinding experiments with normal grinding wheels. The grinding forces and surface roughness were gauged and the morphological characteristics of ground workpiece surfaces were studied. The results showed that with the increase of groove pitch, the normal grinding force was reduced by 9.6-63%, while the tangential grinding force is reduced by 8.3-42%. The groove can promote the flow of coolant, accelerate the heat dissipation and chip removal in the grinding area, reduce the damage of the workpiece and the wear of the grinding wheel, so the vein bionic grinding wheel had more tremendous processing advantages. Among the four kinds of grinding wheels, the leaf-vein bionic grinding wheel with groove pitch equal to 8mm obtained the best grinding effect. The vein-shaped groove had a positive impact on the grinding process.