Graphene-on-Diamond Devices with Increased Current-Carrying Capacity: Carbon sp²-on-sp³ Technology

Abstract

Graphene demonstrated potential for practical applications owing to its excellent electronic and thermal properties. Typical graphene field-effect transistors and interconnects built on conventional SiO 2 /Si substrates reveal the breakdown current density on the order of 1 μA/ nm 2 (i.e., 10 8 A/cm 2 ), which is ∼100× larger than the fundamental limit for the metals but still smaller than the maximum achieved in carbon nanotubes. We show that by replacing SiO 2 with synthetic diamond, one can substantially increase the current-carrying capacity of graphene to as high as ∼18 μA/nm 2 even at ambient conditions. Our results indicate that graphene's currentinduced breakdown is thermally activated. We also found that the current carrying capacity of graphene can be improved not only on the single-crystal diamond substrates but also on an inexpensive ultrananocrystalline diamond, which can be produced in a process compatible with a conventional Si technology. The latter was attributed to the decreased thermal resistance of the ultrananocrystalline diamond layer at elevated temperatures. The obtained results are important for graphene's applications in high-frequency transistors, interconnects, and transparent electrodes and can lead to the new planar sp 2 -on-sp 3 carbon-on-carbon technology.

All‐Carbon Thin‐Film Transistors as a Step Towards Flexible and Transparent Electronics

“…[20] Both these materials have an electric current capacity of 10 9 A cm −2 . [21,22] The thermal conductivity of graphene, up to 5 300 Wm −1 K −1 at room temperature, is greater than for CNTs with a value of 3 500 Wm −1 K −1 . [23,24] Graphene also has a low visible light absorption of 2.3% per carbon-atom sheet.…”

The c-axis thermal conductivity of graphite film of nanometer thickness measured by time resolved X-ray diffraction

“…The superior electrical conductivity of graphene, for example, has been exploited to create interconnects for nanoelectronic circuits that outperform their copper counterparts. 1,2 Going forward, the challenge in leveraging these materials for commercial applications is twofold: First is the ability to devise methods of synthesis that are scalable and controllable; second, and equally important, is the ability to characterize the properties of the synthesized nanostructures, which often differ significantly from the properties of bulk materials. Materials characterization at the nanoscale requires the atomic spatial resolution possible with techniques such as atomic force microscopy, electron microscopy, X-ray diffraction, and others.…”

Ultrananocrystalline diamond films as a high QE photocathode

“…Individual gas flows in the precursor gas mixture were 3 sccm CH4/160 sccm Ar/40 sccm N2. [7]); forth precursor gas N2 is added to achieve nitrogen incorporation in UNCD. (b) A Raman spectrum of the resulting film.…”