Graft Copolymerization Of Acrylic Acid Onto Fatty Chitosan: Synthesis, Characterization and Waste Water Treatment

Abstract

Enviroment is worsening day by day due to industrial pollution, with hazardous chemicals contributing to the accumulation of heavy metal contaminants in waste water. Waste water polluted by these effluents disrupts the usual use of water for irrigation and marine life. The purity and efficiency of water is a paramount concern of mankind. These effluents must also be treated. Natural biopolymers are industrially desirable because of their ability to remove metal ions found in waste water. Among the many other low-cost absorbents listed, chitosan has the highest sorption potential for several metal ions (1) . In specific, we were trying to extract chitosan from shrimp, by N-deacetylation of chitin. The chemical structure of chitosan was characterised by the spectroscopy of Fourier Transform Infrared (FT-IR). The degree of N-deacetylation (DDA) was also calculated from FT-IR data. The use of biosorbent chitosan-fatty acid derivatives makes it possible to extract both heavy metals and organic compounds. In this analysis, the grafting copolymer of fatty chitosan derivatives with acrylic acid polymer was synthesised using ceric ammonium nitrate, the redox nitric acid method under UV irradiation. Synthesized copolymers have been subjected to various analytical techniques such as X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential thermogravimetric analysis (DTA) to confirm the formation of copolymers and to research their thermal stability. The findings show the formation and strong chemical interaction between fatty chitosan derivatives and acrylic acid. Fatty Chitosan derivatives and prepared grafting copolymers have been treated with copper and chromium-containing metal solutions and the results have shown that fatty chitosan derivatives and prepared copolymers are excellent in the removal of heavy metals such as copper and chromium. Prepared compounds could therefore open the way for industrial waste water treatment.

Magnetic chitosan oligomer‐sulfonate‐stearic acid triple combination as cisplatin carrier for site‐specific targeted on MCF‐7 cancer cells: Preparation, characterization and in vitro experiments

“…The reflection at 2 = 14° was associated with crystal form I (Kocabay et al, 2021). The XRD pattern of chitosan stearic acid shows two sharp diffraction peaks at 21.3 ° and 23.6 ° (Hamza et al, 2021). After modification of the chitosan oligomer, the reflection at 2θ = 14° was dissipated, and 2θ = 24°A, which was broad, became sharper in appearance (Figure 5a).…”