Geotechnical Characteristics of Regolith Derived from Nanka Formation, Southeast Nigeria

Abstract

Regolith derived from Nanka Formation; Southeast Nigeria was evaluated for their geotechnical characteristics. The methods of investigations include Fieldwork experiment and laboratory analysis of water and soil samples. The result of hydraulic parameters of the soil at 1meter, 2 meters depth and drilled cuttings from boreholes revealed permeability average values of 1.29E-05(cm/s) and 9.15E-6(cm/s), hydraulic conductivity average value of 1.27E-04(cm/s) and 8.93E-05(cm/s). Drilled cuttings from three boreholes revealed permeability average value of 8.15E-06(m/s), 2.68E-06(m/s) and 6.20E-06, hydraulic conductivity average values of 8.90E-03(m/s), 2.92E-03(m/s) and 6.75E-3(m/s).These values indicate permeable soil with high hydraulic conductivity typical of silty-clay and sand. The permeability/hydraulic conductivity accounts for the high infiltration/percolation of water into the soil. Infiltration of water through the soil initiates geochemical reactions and dissolution mineral which leaves the soil loose and unconsolidated. Geotechnical characteristics show low to medium plasticity and a liquid limit average of 42.36 and 35.45, indicating the capacity of the soil to absorb moisture and expand, bulk density average value of 1.90 mg/m3and compaction test of maximum dry density average value of 1.80 g/cm3 at an optimum water content average of 12.89% indicate low density. Shear strength components of cohesion values range from 0 to 55KN/m2 with average value of 25 KN/m2 and friction angle values range from 7° to 25° suggesting low cohesion and angle of internal friction. This is attributed to the low clay content and the cohesive force is not enough to sustain the soil. Field experiments of cone penetration test of in-situ results indicate a weak and incompetent soil material that is unstable and vulnerable to erosion. The finding would be relevant in soil mechanics problems.