Geochemical and Spatial Distribution of Topsoil HMs Coupled with Modeling of Cr Using Chemometrics Intelligent Techniques: Case Study from Dammam Area, Saudi Arabia

Abstract

Unconsolidated earthen surface materials can retain heavy metals originating from different sources. These metals are dangerous to humans as well as the immediate environment. This danger leads to the need to assess various geochemical conditions of the materials. In this study, the assessment of topsoil materials’ contamination with heavy metals (HMs) was conducted. The material’s representative spatial samples were taken from various sources: agricultural, industrial, and residential areas. The materials include topsoil, eolian deposits, and other unconsolidated earthen materials. The samples were analyzed using the ICP-OES. The obtained results based on the experimental procedure indicated that the average levels of the heavy metals were: As (1.21 ± 0.69 mg/kg), Ba (110.62 ± 262 mg/kg), Hg (0.08 ± 0.18 mg/kg), Pb (6.34 ± 14.55 mg/kg), Ni (8.95 ± 5.66 mg/kg), V (9.98 ± 6.08 mg/kg), Cd (1.18 ± 4.33 mg/kg), Cr (31.79 ± 37.9 mg/kg), Cu (6.76 ± 12.54 mg/kg), and Zn (23.44 ± 84.43 mg/kg). Subsequently, chemometrics modeling and a prediction of Cr concentration (mg/kg) were performed using three different modeling techniques, including two artificial intelligence (AI) techniques, namely, generalized neural network (GRNN) and Elman neural network (Elm NN) models, as well as a classical multivariate statistical technique (MST). The results indicated that the AI-based models have a superior ability in estimating the Cr concentration (mg/kg) than MST, whereby GRNN can enhance the performance of MST up to 94.6% in the validation step. The concentration levels of most metals were found to be within the acceptable range. The findings indicate that AI-based models are cost-effective and efficient tools for trace metal estimations from soil.

Performance Evaluation of Hydroponic Wastewater Treatment Plant Integrated with Ensemble Learning Techniques: A Feature Selection Approach

“…Data characteristics such as linearity, correlation, normality, and data size have major effects on model performance [41]. In fact, there is no single model that is optimal for all datasets.…”

Ensemble hybrid machine learning to simulate dye/divalent salt fractionation using a loose nanofiltration membrane

“…This is crucial for evaluating the performance of a model and fine-tuning its hyperparameters before it is deployed in a real-world setting. 38,39 The models were evaluated using several performance criteria such as RMSE (root mean square error), MSE (mean square error), MAE (mean absolute error), R 2 (determination coefficient), percent bias (PBAIS) and PCC (Pearson correlation coefficient), as shown in eqn (2)–(7), respectively.where the normalised data are represented as y , the measured data as x , the mean data are calculated as x̄ , x max is the maximum value of the data, and x min is the minimum value.…”

“…This is crucial for evaluating the performance of a model and ne-tuning its hyperparameters before it is deployed in a real-world setting. 38,39 The models were evaluated using several performance criteria such as RMSE (root mean square error), MSE (mean square error), MAE (mean absolute error), R 2 (determination coefficient), percent bias (PBAIS) and 2)-( 7), respectively.…”

Validation of Instruments for the Improvement of Interprofessional Education through Educational Management: An Internet of Things (IoT)-Based Machine Learning Approach

“…Linear regression is widely used for various applications, including predicting sales based on advertising spending, estimating housing prices, and analysing the impact of independent variables on a dependent variable [54]. It is a foundation for more complex regression techniques and a valuable tool for statistical analysis and machine learning [24,[55][56][57].…”