Generating test reference years from the UKCP09 projections and their application in building energy simulations

Abstract

In this study, test reference year (TRY) data for three UK cities are generated from the new UKCP09 climate change projections 1 for a variety of future time horizons and carbon emission scenario assumptions. The data are applied to the energy simulation of three commercial buildings and one house for the three city locations (London, Manchester and Edinburgh), three future time horizons in this century and three carbon emission scenarios. Results are compared with those generated using alternative TRYs from two other research groups who used UKCP09 1 as well as with the existing TRY data sets which form the CIBSE Future Weather Years 2 in order to produce robust results. Results of future simulations of peak summer operative temperatures, peak cooling demand, annual cooling energy, peak heating demand and annual heating energy are presented for the four building case studies benchmarked against control weather data for the period 1960–1989. The results show increasing internal operative temperatures (non-air-conditioned) and increasing air-conditioning demands (air-conditioned) throughout this century and though peak heating demands remain similar to control data, annual heating energy consumptions can be expected to fall sharply. Practical applications: Currently, practitioners can use Test Reference Years for use in building energy simulations. In 2009, the CIBSE released Future Weather Years, which go further by allowing practitioners to explore the thermal and comfort behaviour of buildings at future time horizons thus helping to ‘future proof’ a design. In 2009, the United Kingdom Climate Impacts Programme released a new generation of climate change scenario data (the UKCP09 climate change projections) using probabilistic methods. These are the most comprehensive data yet and provides a greater degree of detail than was available to generate the CIBSE Future Weather Years. It is therefore likely that the new data will gradually become the normal basis for investigating future building thermal and comfort response. In this study, a sample of TRY is generated from the UKCP09 data and applied to the simulation of a sample of ‘real’ buildings. The results are compared with both the existing CIBSE Future Weather Years as well as with Test Reference Years generated using UKCP09 by two other research groups. The results provide a robust way forward for simulating building thermal and comfort response using future weather data.

Evaluative application of UKCP09‐based downscaled future weather years to simulate overheating risk in typical English homes

“…This method selects three near-extreme summer months and three nearextreme winter months and weaves them into the COPSE Northumbria TRY (Du et al, 2012b). Three near-extreme winter months and three near-extreme summer months were derived separately.…”

Generating design reference years from the UKCP09 projections and their application to future air-conditioning loads

“…(1) A TRY for each time period (including control) was generated using the method previously reported by Du et al 8 (2) Daily maximum dry-bulb temperatures (T max ) and daily minimum dry-bulb temperatures (T min ) were captured from the UKCP09 Weather Generator 4 daily data for each complete time period, and daily mean dry-bulb temperatures were then calculated from these by averaging.…”

“…The work reported here is focused on nondomestic buildings and builds on earlier work, which concerned itself with the generation of test reference years for use in building energy and comfort performance simulations. 8 The objectives of this work are as follows:…”

Application of a New Dynamic Heating System Model Using a Range of Common Control Strategies

“…Results from two key zones (Nursery and Classroom) on the ground floor have been selected as indicated (red dots) in the floor plan above to provide results for zones with different usage patterns. Simulations were performed using a local Newcastle weather file [24,25] for the building which adopts construction templates used in the COPSE Project [22] shown in Table 2.…”