Ge-doped GaSb thin films with zero mass density change upon crystallization for applications in phase change memories

Abstract

International audienceIn order to optimize materials for phase change random access memories (PCRAM), the effect of Ge doping on Ga-Sb alloy crystallization was studied using combined in situ synchrotron x-ray techniques, electrical measurements, and static laser testing. The present data emphasize that the crystallization temperature can be increased up to 390 degrees C with subsequent higher thermal stability of the amorphous phase; phase segregation is evidenced with GaSb, Sb, and Ge phases that crystallize in a two-step crystallization process. The Ge-doped GaSb films exhibit a larger electrical contrast as compared to undoped GaSb alloy (up to x 100). The optical contrast measured by laser testing is shown to follow the mass density change variations upon crystallization, with a negative contrast (higher value in amorphous state) whatever Ge-doping levels. In situ x-ray reflectivity measurements show that zero mass density change can be achieved by low Ge-doping. Ge-doped GaSb alloys look promising since a phase change material with zero mass density change and higher crystallization temperature satisfactorily fulfills the specifications for reliable PCRAM cells in terms of endurance and data retention. (C) 2016 AIP Publishing LLC

Electronic Structure of Transition-Metal Based Cu2GeTe3 Phase Change Material: Revealing the Key Role of Cu d Electrons

“…It should be noted that typical phase change materials, GST, show a dielectric function larger than that expected by the Clausius-Mossotti equation due to the existence of resonance bonding in the crystalline phase . This implies that typical phase change materials with a high degree of resonant bonding may also show large volume changes (more than 6%) upon switching. − …”

Trade‐Off between Multilevel Characteristics and Power Consumption of High‐Aspect‐Ratio Phase‐Change Memory

“…[16] But it will bring thermal crosstalk, [17] a limited number of stacking layers, [18] and element separation issues. [19] Our previous work [20] proposed a confined structure device with a high aspect-ratio, it can significantly improve storage density. But the aspect-ratio cannot increase infinitely, the power consumption will increase with the increase of aspect-ratio, which will make PCM more difficult to be operated.…”

The Structure of Phase‐Change Chalcogenides and Their High‐Pressure Behavior

“…Considering that pressure can also induce phase transitions, we are probably able to find some clues why such a fast transition could take place. In real memory devices, phase‐change memory units generate non‐negligible stress due to existence of capping layer or density change upon switching so that stability of devices may be compromised . To guarantee the performance, on the one hand, it is possible to explore PCMs with low density change . On the other hand, a clear understanding on how pressure influences properties of materials is necessary to guide better application of PCMs. Strain engineering is an example showing that the planar pressure has fascinating potential to optimize properties of materials .…”