Functionalized Porous Silica-Based Nano/Micro Particles for Environmental Remediation of Hazard Ions

Abstract

The adsorption and separation of hazard metal ions, radioactive nuclides, or minor actinides from wastewater and high-level radioactive waste liquids using functional silica-based nano/micro-particles modified with various inorganic materials or organic groups, has attracted significant attention since the discovery of ordered mesoporous silica-based substrates. Focusing on inorganic and organic modified materials, the synthesis methods and sorption performances for specific ions in aqueous solutions are summarized in this review. Three modification methods for silica-based particles, the direct synthesis method, wetness impregnation method, and layer-by-layer (LBL) deposition, are usually adopted to load inorganic material onto silica-based particles, while the wetness impregnation method is currently used for the preparation of functional silica-based particles modified with organic groups. Generally, the specific synthesis method is employed based on the properties of the loading materials and the silicon-based substrate. Adsorption of specific toxic ions onto modified silica-based particles depends on the properties of the loaded material. The silicon matrix only changes the thermodynamic and mechanical properties of the material, such as the abrasive resistance, dispersibility, and radiation resistance. In this paper, inorganic loads, such as metal phosphates, molybdophosphate, titanate-based materials, and hydrotalcite, in addition to organic loads, such as 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-Calix{4}arene (Calix {4}) arene-R14 and functional 2,6-bis-(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines(BTP) are reviewed. More specifically, we emphasize on the synthesis methods of such materials, their structures in relation to their capacities, their selectivities for trapping specific ions from either single or multi-component aqueous solutions, and the possible retention mechanisms. Potential candidates for remediation uses are selected based on their sorption capacities and distribution coefficients for target cations and the pH window for an optimum cation capture.

Advances in Methods for Recovery of Ferrous, Alumina, and Silica Nanoparticles from Fly Ash Waste

“…SiNPs have always been light for their use in the field of research, industries and medicine owing to their innumerable technological and biomedical applications. SiNPs are specifically used for resins, silica-based catalysts, molecular sieves and several other materials [195]. Until now, their application has been most exploited in biology and medicine as drug carriers [196].…”

Toxic Effects of Hydroxyl- and Amine-functionalized Silica Nanoparticles (SiO2 and NH2-SiO2 NPs) on Caenorhabditis elegans

“…The OH groups provide colloidal stability due to the negatively charged surface in the physiological environment as well as enhance linking interactions between the SiO 2 NP surfaces and target biomolecules (Osseo-Asare and Arriagada, 1999;Haensch et al, 2010). In addition, the contaminant adsorption of SiO 2 NPs can be improved through the control of their surface chemistry (Li et al, 2019). Aside from the OH group-containing SiO 2 NPs, amine-functionalized SiO 2 NPs (NH 2 -SiO 2 NPs) are also popular for surface modification purposes, such as in processes that involve the attachment of a variety of organic groups (Ghosh et al, 2013).…”

Inorganic and Hybrid (Organic–Inorganic) Lamellar Materials for Heavy Metals and Radionuclides Capture in Energy Wastes Management—A Review

“…Chemical processes, such as evaporation, ion exchange, chemical precipitation, membrane filtration technologies, etc. [5,6,7,8,9,10,11,12], are generally very expensive and not suitable for low pollutant concentrations and selective removal, which causes damages to both the environment and life [13].…”