Functional and Tableting Properties of Alkali-Isolated and Phosphorylated Barnyard Millet (Echinochloa esculenta) Starch

Abstract

The functional and tableting properties of barnyard millet starch (Echinochloa esculenta) were investigated in its native (alkali-treated) and chemically modified (phosphorylated) states. The grains were pulverized, soaked, and ground before filtration to separate starch and protein. Multiple NaOH treatments were performed. The starch was washed, neutralized, and dried. Sodium tripolyphosphate (STPP) and sodium sulfate were used to modify the starch, followed by maceration, washing, and drying to remove unreacted chemicals. The amylose content of alkali-treated barnyard millet starch increased by 19.96 ± 3.56% w/w. The amount of protein, the kind of starch used, and the size of the starch granules, all affected the ability of the starch granules to swell up. It was observed that alkali-extracted barnyard millet starch (AZS) has a swelling power of 194.3 ± 0.0064% w/w. The swelling capacity of treated starch was lesser as compared to the native alkali barnyard millet starch. Decrement in swelling power of phosphorylated starch was observed due to tightening of bonds in the molecular structure. The moisture content of the excipients may affect the overall stability of the formulation. The moisture content of the AZS was found to be 15.336 ± 1.012% w/w. Compared to AZS, cross-linked barnyard millet starch had a moisture content that was up to 20% lower than AZS. The Hausner ratio for phosphorylated starch was found to be 1.25, which indicates marked flow property. Similar morphologies could be seen in the alkali-isolated barnyard millet starch and the cross-linked/phosphorylated barnyard millet that was cross-linked using a mixture of sodium sulfate and sodium tripolyphosphate. The modest degree of substitution would have no effect on the surface morphology as shown by the scanning electron microscopic study. The crushing and compacting abilities of modified barnyard millet starch were also improved, but its friability and rate of disintegration were decreased. The whole study revealed that after cross-linking, barnyard millet had good tableting properties and it can be used as an excipient in drug delivery.

Immunomodulatory and AntiOxidant Potential of Polyherbal Dhatryadi Rasayana in the Form of Churna and Granules

“…The % compressibility of a powder is a direct indicator of the possible powder arch or bridge strength and stability. Both the Hausner’s ratio and Carr’s index were calculated by using the following equations: ,, Carr’s index = Tapped density − bulk density Tapped density × 100 Hausner’s ratio = Tapped density Bulk density …”

“…It was determined by heap method reported elsewhere , using the following expression: Angle of repose = h r …”

“…Hausner's ratio Tapped density Bulk density = (6) Angle of Repose. It was determined by heap method reported elsewhere 13,22 using the following expression: h r Angle of repose = (7) where "r" is the radius of heap made by the powder and "h" is the height of heap.…”