Full-scale fatigue testing of a cast-iron wind turbine rotor shaft

Abstract

Spheroidal graphite cast iron (EN-GJS), which provides a high degree of design flexibility and the possibility for lightweight design, has benefits as a material for use in structural parts in wind turbines. Comparing components made using the sand casting technique to those made using the chill casting process reveals significant potential to boost strength. However, at present, there is neither a proven design guideline nor reliable material input data for a lightweight component based on this material and fabrication process. This publication presents the results from the Gusswelleproject in chronological order. It starts with the explanation of the final setup and test plan for the full-scale rotor shaft fatigue experiment. The elaborated sensor and operational concept are then presented together with an adequate finite element method (FEM) model of the specimen and relevant neighboring components. The validation of this FEM model to ensure that the loading and the resulting local strains representing the real test bench situation is described. The usage of non-destructive testing to document the condition of the specimen from initial crack formation until integrity loss is explained followed by a comparison between the component fatigue test results and the material-based life-time forecast. A strength increase for chill-cast large components in the range of 50% is indicated. Simulation-based crack propagation studies are performed to qualitatively verify the loads responsible for the observed cracks of the component test and to further develop the possible method for crack predictions.

Mechanism Analysis for the Enhancement of Low-Temperature Impact Toughness of Nodular Cast Iron by Heat Treatment

“…Cast iron, a versatile material utilized extensively in the engineering field, has obtained global recognition and application due to its unique combination of castability, machinability, and a relatively low manufacturing cost [1][2][3]. Its characteristics, including high melting point and excellent fluidity make it a prime choice in various engineering applications.…”