Frontal pyrometric snapshot measurements of the keyhole wall temperature in laser welding of pure aluminium

Abstract

In deep penetration laser welding, the quality of the weld seam is strongly correlated with the process dynamics. Pronounced dynamics of the melt pool and the keyhole cause defects like pores and blow-outs which negatively affect the mechanical properties of the seam. The process dynamics are primarily governed by the fluctuations of the keyhole shape. Therefore, in order to avoid the occurrence of defects in the weld seam, it is necessary to gain control over the keyhole stability by understanding the underlying physical processes that contribute to its dynamics. Besides the intensity distribution of the laser beam on the keyhole walls, the keyhole wall temperature is a crucial influencing factor when it comes to the assessment of the local metal evaporation rate and the induced local recoil pressure acting on the keyhole wall. Using small high-melting tantalum probes as measuring channels, temperatures in the vicinity of the Knudsen layer at the keyhole front wall were measured at different depths below the sample surface by means of high-speed pyrometry. For this purpose, bead on plate welding was conducted at low process velocities in the Rosenthal regime using pure aluminium (EN AW-1050A) as substrate material. It is shown for different laser powers and process velocities that the melt temperature in the vicinity of the keyhole wall lies in the range of 3000 K ± 400 K, therefore intermittently exceeding the vaporisation temperature of the substrate material. Significant correlations between the keyhole wall temperature and the laser power as well as the measuring depth could not be identified.