From modeling to hardware: an experimental evaluation of image plane and Fourier plane coded compressive optical imaging

Abstract

Computational imaging based on compressed sensing (CS) has shown potential for outperforming conventional techniques in many applications, but challenges arise when translating CS theory to practical imaging systems. Here we examine such challenges in two physical architectures under coherent and incoherent illumination. We describe hardware alignment protocols that can be used to optimize system performance for each case. We found that an architecture using coded masks located at a conjugate image plane outperformed an identical architecture using masks at a Fourier plane, enabling recovery of images with up to 64 times more resolvable points than pixels in the image sensor. We demonstrate and explain the basis for the tradeoff between achievable resolution and dynamic range of reconstructed CS images. Finally, we demonstrate that these principles can be applied beyond binary test targets by reconstructing a 480 × 480 image of a human tissue section from a 120 × 120 pixel sensor. These results provide a basis to further develop compressive imaging architectures for biomedical imaging and we also anticipate that these findings may be useful to investigators focused on translating CS theory to other real-world imaging applications.

A feasability study for a compressive sensing imager in the medium infrared for hotspot detection

“…On the other hand, in recent years ESA has funded some studies to investigate the potential of CS for the construction of optical payloads based on this approach[7] [7]- [10] . Regarding super-resolution, some prototypes have been developed to demonstrate its feasibility [11]- [13] . In Mahalanobis, R., Shilling, R., Murphy, R. and Muise, R., "Recent results of medium wave infrared compressive sensing," Appl.…”

A Novel Approach of Parallel Retina-Like Computational Ghost Imaging

“…Meanwhile, a larger image size will increase the computational complexity of the reconstructed algorithm, thereby costing more time for the reconstruction. Therefore, a method of parallel architecture was proposed to improve the performance of high-resolution imaging [ 14 , 15 , 16 , 17 ].…”

Single‐pixel compressive imaging based on motion compensation

“…Compressive sensing (CS) [3, 4] provides a new approach for solving these difficulties by recovering images that are sparse on some representation basis from much fewer samples than that required by the Shannon's sampling theorem. This new imaging scheme is usually called compressive imaging (CI) [5–7]. In CI, the conventional imaging system is redesigned to save the sensor cost or to reduce the acquisition time.…”