From Colloidal Monodisperse Nickel Nanoparticles to Well-Defined Ni/Al₂O₃ Model Catalysts

Abstract

In the past few decades, advances in colloidal nanoparticle synthesis have created new possibilities for the preparation of supported model catalysts. However, effective removal of surfactants is a prerequisite to evaluate the catalytic properties of these catalysts in any reaction of interest. Here we report on the colloidal preparation of surfactant-free Ni/AlO model catalysts. Monodisperse Ni nanoparticles (NPs) with mean particle size ranging from 4 to 9 nm were synthesized via thermal decomposition of a zerovalent precursor in the presence of oleic acid. Five weight percent Ni/AlO catalysts were produced by direct deposition of the presynthesized NPs on an alumina support, followed by thermal activation (oxidation-reduction cycle) for complete surfactant removal and surface cleaning. Structural and morphological characteristics of the nanoscale catalysts are described in detail following the propagation of the bulk and surface Ni species at the different treatment stages. Powder X-ray diffraction, electron microscopy, and temperature-programmed reduction experiments as well as infrared spectroscopy of CO adsorption and magnetic measurements were conducted. The applied thermal treatments are proven to be fully adequate for complete surfactant removal while preserving the metal particle size and the size distribution at the level attained by the colloidal synthesis. Compared with standard impregnated Ni/AlO catalysts, the current model materials display narrowed Ni particle size distributions and increased reducibility with a higher fraction of the metallic nickel atoms exposed at the catalyst surface.

Tunable colloidal Ni nanoparticles confined and redistributed in mesoporous silica for CO2 methanation

“…Moreover, despite several studies in recent years aiming to control Ni nanoparticle (NiNP) size, only limited studies have provided synthetic approaches that yielded NiNPs between 1-10 nm, which that were then also deposited on a support to investigate particle sintering after capping agent removal. 14 Colloidal nanoparticles are comprised of a metallic core stabilized by long-chain organic ligands (capping/stabilizing agents). Vital to obtaining homogeneously dispersed nanoparticles are homogeneous seed formation (nucleation) of metallic monomers, induced by metal atom (monomer) concentrations surpassing a threshold concentration (supersaturation).…”

Preparation of Cobalt Nanocrystals Supported on Metal Oxides To Study Particle Growth in Fischer–Tropsch Catalysts

“…First, homogeneous attachment of base metal NC on a support can be hindered by magnetic interactions between the NC . Second, removal of the stabilizing ligand shell can be incomplete, blocking active sites and lowering catalytic activity, or harsh treatments are applied that may compromise the well-defined nature of the catalyst. , Recently we demonstrated uniform attachment and successful ligand removal for Co-NC supported on carbon nanotubes by applying a mild, low-temperature oxidation to the NC in suspension prior to attachment …”

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

“…6–8 nm sized supported NPs with a core–shell structure were evidenced. [ 49 ] In another report, Cu‐Ni core–shell NPs and nanowires were prepared by using Cu seeds and growing a Ni shell onto them in an epitaxial manner, in the presence of Ni(acac) 2 and OAm. The Ni shell can improve the anti‐oxidation properties of copper nanomaterials.…”