Frictional Characteristics of Silicon Surface with Micro-dimple Pattern

Yoo, Sung-Shik; Heo, Yoon-Young; Kim, Dae Eun

doi:10.7736/kspe.2014.31.5.451

Cited by 1 publication

(1 citation statement)

References 10 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…a high laser output greatly increased the specimen temperature. as the specimen temperature increased, the specimens were able to cool at a faster rate than those under other conditions to form the martensitic structure [15]. 3 shows the Sem/energy-dispersive X-ray analysis (eDX) results of the haZ formed under the laser outputs of 3, 4, and 5 kW.…”

Section:  mentioning

confidence: 99%

Effect of Output Conditions on Microstructure and Properties of SKD61 Laser Cladding

Kim,

Yoo,

Hong

2024

Archives of Metallurgy and Materials

View full text Add to dashboard Cite

This study investigated the effect of cladding on tool steel (SKD61) by using 5%Cr-1.5%Mo-Fe powder (SKD61), which is expected to be economically effective when used to manufacture and mend die-casting parts. The cladding conditions were as follows: the distance between the coaxial powder supply head and the substrate surface was 20 mm, and Ar was used as the supply gas. The laser outputs applied in the cladding procedure were 3, 4, and 5 kW. The microstructure of the heat-affected zone in the processed specimens was analyzed, and the macrostructure and morphology of the substrate material were studied. Specimen hardness measurements were performed at intervals of 0.1 mm from the substrate surface to the core. As the laser output increased from 3 to 4 and 5 kW, the dilution rate increased from 10.6% to 11.8 and 13.2%. It was confirmed that the fraction of carbides increased as the laser output increased from 3 kW to 5 kW.

show abstract

Section:  mentioning

confidence: 99%