Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition

Wear Characterizations of Polyoxymethylene (POM) Reinforced with Carbon Nanotubes (POM/CNTs) Using the Paraffin Oil Dispersion Technique

“…(10). In summary, the average specific wear rate in air medium for the polymer consider the best condition and this result similar to Meng et al (2009) [16].…”

“…Also the addition of CNT did increase the melting temperature and crystallinity of CNT/POM as shown in Fig. (4) and Table I which indicated that CNT acted as effective heterogeneous nucleating agents to facilitate the crystallization of POM [16]. The mechanical property measurements of POM and CNT/POM composites ( Table II) showed imporovement of the mechanical properties of 0 and 1 wt.…”

“…Carbon nanotubes (CNT) have been successfully utilized to increase the wear resistance of the polymeric material [14][15][16]. However, works on CNT/POM composites are scarce in the literature due to poor compatibility of POM with other materials [17].…”

Microtribological Behavior of Polymer-Nanoparticle Thin Film with AFM

“…The tribological properties of CNTs as reinforcement agent in metal-based composite were studied by a few groups (Meng et al, 2009;Pei et al, 2008). The results indicated that metal-CNT composite coating was better wear resistance and self-lubricity than the metal coating.…”

Study of friction and abrasion properties of wood plastic composites

“…In recent years, more and more plastic materials have been used as functional parts [1][2][3]. In particular, polyacetal (POM) is often used as the sliding parts [4].…”