Four-way coupled simulations of small particles in turbulent channel flow: The effects of particle shape and Stokes number

Abstract

1 Four-way coupled simulations of small particles in turbulent channel flow This paper investigates the effects of particle shape and Stokes number on the behaviour of non-spherical particles in turbulent channel flow. Although there are a number of studies concerning spherical particles in turbulent flows, most important applications occuring in process, energy and pharmaceutical industries deal with non-spherical particles. The computation employs a unique and novel four-way coupling with the Lagrangian point-particle approach. The fluid phase at low Reynolds number (Re τ = 150) is modelled by DNS, while particles are tracked individually.Inter-particle and particle-wall collisions are also taken into account. To explore the effects of particles on the flow turbulence, the statistics of the fluid flow such as the fluid velocity, the terms in turbulence kinetic energy equation, the slip velocity between the two phases and velocity correlations are analysed considering ellipsoidal particles with different inertia and aspect ratio.The results of the simulations show that the turbulence is considerably attenuated, even in the very dilute regime. The reduction of the turbulence intensity is predominant near the turbulence kinetic energy peak in the near wall region, where particles preferentially accumulate. Moreover, the elongated shape of ellipsoids strengthens the turbulence attenuation. In simulations with ellipsoidal particles, the fluid-particle interactions strongly depend on the orientation of the ellipsoids. In the near wall region, ellipsoids tend to align predominantly within the streamwise (x) and wall-normal (y) plane and perpendicular to the span-wise direction, whereas no preferential orientation in the central region of the channel is observed. Important conclusions from this work include: the effective viscosity of the flow is not affected, the direct dissipation by the particles is negligible, and the primary mechanism by which the particles affect the flow is by altering the turbulence structure around the turbulence kinetic energy peak.

Point-Particle DNS and LES of Particle-Laden Turbulent flow - a state-of-the-art review

“…In this section we will only consider spherical particles. Collision algorithms for non-spherical particles have also been developed and studied [ 93 , 122 ]. Zhao et al [ 122 ] considered ellipsoidal particles and used an extension of a collision search algorithm for spherical particles by treating each ellipsoid as a set of overlapping fictitious spheres, whose hull approximately corresponds to the shape of the ellipsoid.…”

Statistics of rigid fibers in strongly sheared turbulence

“…Here, the fiber orientation is a result of the competition between alignment by mean velocity gradients and randomization by fluctuating velocity gradients [11]. This can lead to either an alignment parallel to the flow direction [14,15] or at an angle with the wall [16][17][18][19][20][21][22]. However, most of the studies in shear flows have been done by numerical simulations, addressing the simplified case of inertial point-like fibers without gravity.…”

A Mixing Behavior Study of Biomass Particles and Sands in Fluidized Bed Based on CFD-DEM Simulation

“…Modeling is calculated by the in-lab code Multi-Flow [40]. In CFD frame, the calculation domain has same width and length as the experimental fluidized bed (30 mm × 120 mm) but considering the computational efficiency, the height of numerical model is 600 mm.…”