Formation of NO and SO2 in the Sintering Process of Iron Ores

Effects of Adding Iron Ores-based Calcium Ferrites to the Sinter Mix on Sinter Quality and Reduction of CO₂, NO and SO₂

“…Table 5 summarizes the composition of each combination. The heating pattern used in this study was the same as previously applied by Cho et al 45) The temperature was raised at a rate of 100°C/min from room temperature to 1 100°C and at 30°C/min from 1 100°C to 1 350°C. The composition of the gas injected into the furnace was always maintained at 79 vol% Ar and 21 vol% O 2 during the whole experiment.…”