Formability Analysis of AA6061 Sheet in T6 Condition

Abstract

Formability of a material is defined as its ability to deform into desired shape without being fracture. There will always be a need for formability tests, a larger number of tests have been used in an effort to measure the formability of sheet materials. Aluminium Alloy 6061 is a magnesium and silicon alloy of aluminium. It is also called as marine material as it has high corrosion resistance to seawater. In this paper Formability test of AA6061 sheet is done by Forming Limit Diagram (FLD) Analysis. FLD or Forming Limit Curve (FLC) for the forming processes of AA6061 sheets is obtained by Experimental method and FEM. Experimental method involves Deep drawing test of the sheet and ANSYS software is used for FEM.

The Effect of GTAW Variants on Tensile and Microstructural Properties of AZ31B Magnesium Alloy Joints

“…e junction created by welding MAO joints reached its maximum tensile strength. e higher tensile strength of the junction is also due to the weld metal's spreading of higher hardness [17,18]. "In the weld, very fine grains were produced as a result of enhanced cooling rates near the weld center in comparison to the fusion boundary" [19].…”

Parameters of the extraction of a thin-walled glass made of corrosion-resistant steel 12X18N10T

“…Mathematical modeling of the process of single-circuit reverse extrusion of a part of the "glass" type was carried out in the DEFORM calculation complex [8][9][10][11][12][13][14]. The DEFORM software package is a specialized software tool that allows you to solve problems related to cold, semi-hot and hot stamping of materials, taking into account the nonlinear behavior of materials and large plastic deformations.…”