Flying couplers above spinning resonators generate irreversible refraction

Abstract

Creating optical components that allow light to propagate in only one direction-that is, that allow non-reciprocal propagation or 'isolation' of light-is important for a range of applications. Non-reciprocal propagation of sound can be achieved simply by using mechanical components that spin. Spinning also affects de Broglie waves , so a similar idea could be applied in optics. However, the extreme rotation rates that would be required, owing to light travelling much faster than sound, lead to unwanted wobbling. This wobbling makes it difficult to maintain the separation between the spinning devices and the couplers to within tolerance ranges of several nanometres, which is essential for critical coupling. Consequently, previous applications of optical and optomechanical isolation have used alternative methods. In hard-drive technology, the magnetic read heads of a hard-disk drive fly aerodynamically above the rapidly rotating disk with nanometre precision, separated by a thin film of air with near-zero drag that acts as a lubrication layer . Inspired by this, here we report the fabrication of photonic couplers (tapered fibres that couple light into the resonators) that similarly fly above spherical resonators with a separation of only a few nanometres. The resonators spin fast enough to split their counter-circulating optical modes, making the fibre coupler transparent from one side while simultaneously opaque from the other-that is, generating irreversible transmission. Our setup provides 99.6 per cent isolation of light in standard telecommunication fibres, of the type used for fibre-based quantum interconnects . Unlike flat geometries, such as between a magnetic head and spinning disk, the saddle-like, convex geometry of the fibre and sphere in our setup makes it relatively easy to bring the two closer together, which could enable surface-science studies at nanometre-scale separations.

Nonreciprocal unconventional photon blockade in a spinning optomechanical system

“…Concerning a possible experimental implementation of nonreciprocal UP, it is worth noting that UPB for non-spinning devices has already been demonstrated experimentally in two recent works [36,37]. A number of experiments (including the very recent work [54]) have shown non-reciprocal quantum effects in spinning devices. So the main experimental task for achieving non-reciprocal UPB in a spinning device would be to combine experimental setups of, e.g., Refs.…”

“…So the main experimental task for achieving non-reciprocal UPB in a spinning device would be to combine experimental setups of, e.g., Refs. [36,37,54] into a single spinning UPB setup.…”

“…where ω R = 2πc/λ is the optical resonance frequency for the nonspinning OM resonator, c (λ) is the speed (wavelength) of light in the vacuum, and n is the refractive index of the cavity. The dispersion term dn/dλ, characterizing the relativistic origin of the Sagnac effect, is relatively small in typical materials (∼ 1%) [54,81]. For convenience, we always assume the counterclockwise rotation of the resonator.…”

Non‐Reciprocity in High‐Q Ferromagnetic Microspheres via Photonic Spin–Orbit Coupling

“…The Q factor is about 2.25 × 10 5 , corresponding to a linewidth of . This large mode splitting will lead to applications in optical isolation, if the critical coupling is achieved, and optical circulation by a Mach–Zehnder interferometer configuration …”

Topologically protected photonic modes in composite quantum Hall/quantum spin Hall waveguides

“…Novel non-reciprocal structure designs, like isolators and circulators, have been proposed recently due to their important roles in photonic and microwave circuits [50][51][52][53][54][55][56][57]. After the experimental demonstration of the Yjunction structure, we are in position to integrate different PTIs into another practical structure, namely a 4-port circulator.…”