Flexible PCB Failures From Dynamic Activity and Their Impacts on Bioimpedance Measurements: A Wearable Case Study

Abstract

Wearable health monitoring systems that collect data in free-living environments are becoming increasingly popular. Flexible printed circuits provide a commercially available option that can conform to the shape of a wearable system and support electronic sensing and flexible interconnect. However, repetitive dynamic activity can stress and damage the interconnect of flexible PCBs which degrades data quality. This case study evaluated the performance of flexible PCBs providing interconnect between electrodes and sensing electronics for tissue bioimpedance measurements in a wearable system. Resistance data (1 kHz to 128 kHz) was collected from localized knee tissues of 3 participants using the wearable design with flexible PCBs over 7 days of free-living. From electrical and optical inspection after use trace cracking of the flexible PCBs occurred, degrading tissue resistances reported by the wearable system. Exploration of these results advances understanding of how flexible PCBs perform in free-living conditions for wearable bioimpedance applications.

A low-cost, portable, two-dimensional bioimpedance distribution estimation system based on the AD5933 impedance converter

“…In future prototypes, a Secure Digital (SD) memory card will be added to the Arduino board to prevent data loss in the event of a wireless communication failure. A bioimpedance measurement system using an SD card for data storage is described in [36] .…”

Circuit-Level Modeling and Simulation of Wireless Sensing and Energy Harvesting With Hybrid Magnetoelectric Antennas for Implantable Neural Devices

“…For example, [ 36 ] includes a measurement test setup to characterize Lorentz-force MEMS magnetometers. On the other hand, [ 37 ] describes the difficulties of collecting data involving measurements with flexible printed circuit boards (PCBs) for wearable healthcare monitoring applications. As part of this research, a measurement platform was developed to experimentally investigate and demonstrate phenomena that enable magnetic modulation by exploiting the properties of micrometer-sized ME antennas.…”

A Flexible Printed Circuit Board-Based ZnO Enzymatic Uric Acid Potentiometric Biosensor Measurement and Characterization

“…Also, polyimide is attributed to excellent flexibility and high mechanical strength. On top of PI, copper wire and immersion gold can provide good electrical conductivity characteristics and chemical stability [17]. Furthermore, the FPCB has the potential to integrate with electronic circuits such as analog readout frontend and power management circuits for battery devices that can dramatically 2 MANUSCRIPT ID NUMBER reduce the device's size.…”