Flexible Copper Nanowire/Polyvinylidene Fluoride Membranous Composites with a Frequency-Independent Negative Permittivity

Abstract

With the increasing popularity of wearable devices, flexible electronics with a negative permittivity property have been widely applied to wearable devices, sensors, and energy storage. In particular, a low-frequency dispersion negative permittivity in a wide frequency range can effectively contribute to the stable working performance of devices. In this work, polyvinylidene fluoride (PVDF) was selected as the flexible matrix, and copper nanowires (CuNWs) were used as the conductive functional filler to prepare a flexible CuNWs/PVDF composite film with a low-frequency dispersion negative permittivity. As the content of CuNWs increased, the conductivity of the resulting composites increased sharply and presented a metal-like behavior. Moreover, the negative permittivity consistent with the Drude model was observed when CuNWs formed a percolative network. Meanwhile, the negative permittivity exhibited a low-frequency dispersion in the whole test frequency range, and the fluctuation of the permittivity spectra was relatively small (−760 to −584) at 20 kHz–1 MHz. The results revealed that the high electron mobility of CuNWs is reasonable for the low-frequency dispersion of negative permittivity. CuNWs/PVDF composite films with a frequency-independent negative permittivity provide a new idea for the development of flexible wearable electronic devices.