First Implementation of Diversion Stimulation Service with Multimodal Particles in Caspian Offshore Oilfield

The paper describes the results of the first multistage hydraulic fracturing operations in Russia on the Caspian Sea shelf in the gas condensate and oil deposits of the Aptian formation of V. Filanovsky field. In addition to the small productive formation depth, long horizontal sections with a complex trajectory and high collapse gradients due to large zenith angles when passing the Albian and Aptian deposits of poorly consolidated sandstones are an additional challenge for choosing a multistage hydraulic fracturing assembly. The above features require the use of modern sand control screens with enhanced frac sleeves. A design was developed which includes frac sleeves and sand control screens that can withstand multiple cycles of hydraulic impact during hydraulic fracturing, as well as many opening/closing cycles. A seawater-based frac fluid system was applied. The frac fleet was located on a pontoon, the coiled tubing – on a platform. For the first time in Russia, a 2-5/8 inch coiled tubing with a complex-type friction reducing system was used to switch coupling/sleeves in conditions of very long horizontal sections, complex trajectories, and high friction coefficients. The minimum distances between the screen's sliding sleeves and frac sleeves did not prevent from performing manipulations in complex environment. For well cleaning, the frac assemblies of reverse rotary-pulse and rotary-directional types were used. At the first stage of the project, the development of an optimal method of well completion was successfully implemented. Due to the close interaction of the operating company, service company, and science & engineering team of the operator, for the first time in Russia the design of downhole equipment with the use of advanced technologies of sand control screens, frac sleeves was presented. This solution has proved its effectiveness – the downhole equipment has retained its operational properties after a long period of well operation and further in the process of hydraulic fracturing. At the second stage of the project, 32 MSHF operations were performed at four wells. To reduce nonproductive time and operational risks, a satellite communication complex was additionally deployed on the pontoon to join the engineering centers of Astrakhan, Moscow, and Houston. After finishing the well development, the design indicators for formation fluid rates were achieved, which proved the effectiveness of the stimulation of the field's target objects – this opens great prospects for further development of low-permeability reservoirs at offshore sites in the Caspian Sea. The successful project implementation and the achievement of the design values of oil flow rates has expanded the possibilities of commercial operation of the low-permeable Aptian formation, complicated by the presence of a gas cap and underlying water. A solution was presented for working in extended horizontal well sections with 2-5/8 inch coiled tubing together with a complex-type mechanical friction reducing system. The economic effect was achieved when solving tasks of manipulating mechanical screen couplings and frac port sleeves without the involvement of downhole tractors. The use of new solutions in the completion assembly made it possible to eliminate additional sand ingress problems.

show abstract

Design and Analysis of Improved Swelling and Degradable Diverting Agent for Multistage Hydraulic Fracturing

Ikebata

Onishi

Furui

et al. 2022

SPE Production &Amp; Operations

View full text Add to dashboard Cite

Summary Fracturing fluid diversion plays a crucial role in maximizing the well productivity of multistage fractured wells. Proper sizing and material design of diverting agents are key elements to effectively bridge and plug perforations and fractures during treatment. In this study, we present an improved design for a water-soluble diverting agent that can cover a range of fracture widths. In addition, a wellbore flow model that predicts the swelling and dissolution behaviors of diverting agents flowing from the surface to the fractures was developed for field applications. Butenediol vinyl alcohol copolymer (BVOH), which has elastic and sticking properties in water, is used as a diverting agent. Cylindrical pellets and smaller sized powder, made from the polymer, were mixed to bridge and plug hydraulic fractures. BVOH diverting agents were evaluated for slit widths of 1–4 mm with different pellet geometries using a high-pressure and high-temperature filtration apparatus. The swelling and dissolution rates depend on many parameters such as the temperature, dissolution time, crystallinity degree, and geometry. In this study, empirical correlations that predict the swelling and dissolution rates of BVOH polymers for various formulations were developed and implemented in a wellbore flow model that simulates fluid flow and heat transfer during pumping operations. A theoretical case study of a multistage hydraulic fracturing treatment was also presented to demonstrate the applicability and effectiveness of the treatment. The filtration test results with various diverting agent designs indicate that the length and diameter of the pellets affect the performance and effectiveness of the bridging and plugging fracture-like slits. Moreover, an optimum pellet size exists for different slit sizes. With modified pellet size and diameter ratios, wider slits of 3–4 mm can be effectively plugged by diverting agents with reduced leakoff volumes. The swelling and dissolution models correlated well with the experimental data, considering the temperature, dissolution time, and crystallinity degree. The case studies presented in this study illustrate that the models can predict the time required for the diverting agents to dissolve under field conditions and determine whether the diverting agents pumped into the well provide sufficient conditions for diversion. Furthermore, the study results indicate that the pump rate and injection conditions before pumping the diverting agent are key controlling factors in determining the dynamic downhole temperatures and thus affect the time required for the degradation of the diverting agent. In addition, a field trial result is presented to demonstrate the effectiveness of the swellable, BVOH diverting agent at low downhole temperatures, and hydraulic fracturing treatment in the Permian Basin. Swelling diverting agents exhibit a more elastic behavior than existing particulate diverting agents. Swelling polymers are less abrasive and thus reduce the risk of equipment damage during preparation and pumping. The wellbore flow simulator developed in this study helps stimulation engineers optimize material types, particle-size distribution, and concentration of diverting agents for various field applications.

show abstract

First Implementation of Diversion Stimulation Service with Multimodal Particles in Caspian Offshore Oilfield

Cited by 3 publications

References 5 publications

Application of new viscoelastic acidizing of diverting technology in horizontal wells of Tarim oilfield

Application of new viscoelastic acidizing of diverting technology in horizontal wells of Tarim oilfield

First Multistage Hydraulic Fracturing in Russian Offshore: Integrated Approach to Completion and Stimulation of Apt Deposits of V.Filanovsky Field

Design and Analysis of Improved Swelling and Degradable Diverting Agent for Multistage Hydraulic Fracturing

Contact Info

Product

Resources

About