Finite element simulation of creep of spiral strands

Increasing Role of Sections Caused by 3D Modelling

“…Machine drawings sections are mostly made by a parallel plane to any of the reference planes (Ivanco et al, 2016). In most cases cuts can be drawn without specific editing methods, just by approach but rules of descriptive geometry must be observed.…”

The Examination of Dynamic Effects of Shape Optimized Vehicle Components

“…by 40%) can be reduced the stub shafts mass (Ficzere and Török, 2013). It is important to note that the shape optimization causes in reducing the mass, the time of manufacturing, costs, fatigue properties, and dynamic behaviour as well (Ivanco et al, 2016). In this study we examine the reducing of the mass effect on the dynamic behaviour.…”

Mechanical Modeling and Analysis of Braided Wire Rope

“…And the finite element simulation of the wire rope under tension condition was carried out. [3][4][5] However, the scholars have less research on the braided wire rope. Some scholars have made a preliminary study for braided wire rope from types, performance, structural characteristics and the problems existing in the processing and use, causes analysis of fracture, etc.…”