The checkerboard constitutes the best pattern for full‐field strain measurement because it maximizes image gradient. In the experimental mechanics community, employing this pattern is currently strongly limited because depositing it on the surface of specimens raises practical difficulties. A recent study shows, however, that it is technically possible by using a laser engraver. The present paper aims to push this solution forward by printing a checkerboard pattern on a thin polymeric film and then gluing the resulting laser‐engraved film on the specimen surface. The underlying idea is to separate the manufacturing process of this optical strain gauge on the one hand and its use on the other hand to help spread this strain measuring tool in the experimental mechanics community. The polymeric film employed here is the same as that used in the manufacturing process of classic electrical gauges, so one can rely on the know‐how of classic strain gauge bonding to glue this optical strain gauge on the specimen surface. The main difference between the proposed tool and classic electrical gauges is that the strain field beneath the polymeric support is measured instead of localized strain values. The paper is a proof of concept for this strain field measuring tool. The manufacturing and bonding processes are described in the paper. The localized spectrum analysis, a spectral technique developed for processing images of periodic patterns, is used to retrieve the strain fields from checkerboard images. Through two complementary examples, we show the ability of this new type of strain gauge to detect and quantify local details in the strain field beneath. A simplified 1D model is also proposed to assess the minimum width of the strain peak that can reliably be measured with this technique.
