Final report on intercomparison measurements in the field of gas flow and volume, which are realized at two levels: the second level (B*)

Abstract

COOMET project no 219/SK-a/00 'Performance of comparison measurements of testing standard equipment working in the gas flowrate range: (A) 0.06 m3/h to 10 m3/h; (B) 100 m3/h to 1000 m3/h', ref. no COOMET.M.FF-S1 has been organized by TC 1.4 'Flow measurement' of COOMET, started in March 2006 and finished in October 2008.Type of comparison – supplementary; Pilot laboratory – SMU, Slovak Institute of Metrology. Participating institutes (and countries): SMU, Slovakia; PTB, Germany; LEI, Lithuania; BelGIM, Belarus; FGUP VNIIR, Russia; SE 'Ivano-Frankovskstandartmetrology', Ukraine; NISM, Moldavia.The comparison was realized at two levels.Within the first level (A*), the comparisons of the test rigs were realized for verification of the diaphragm domestic gas meters in the flow range of 0.12 m3/h to 10 m3/h. The compared measurement means were the set of five diaphragm gas meters of type MKM, size G6. Two laboratories (SMU Bratislava, Slovakia and LEI Kaunas, Lithuania) of the seven participating laboratories at this level are participants in projects of comparisons, which are organized within the regional metrological organization EUROMET.The second level (B*) assured a comparison measurement of testing devices for industry gas meters of flow range from 100 m3/h to 1000 m3/h. The comparison meter was an axial turbine gas meter of DAE type, G650 size serial number 0004455/2005. Seven laboratories participated at this level of the project, including the laboratory of Belarus with a limited flow rate range (from 100 m3/h to 400 m3/h). Three laboratories (PTB Braunschweig, Germany; SMU Bratislava, Slovakia and LEI Kaunas, Lithuania) of the seven participating laboratories at this level are participants of comparisons, which are organized within the regional metrological organization EUROMET; out of that group the laboratory PTB Braunschweig, Germany is also participant in a CIPM key comparison.Based on the given results, one can say that the first comparison in this field within the COOMET regional organization achieved good results.Main text. To reach the main text of this Paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.The final report has been peer-reviewed and approved for publication by COOMET, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Get 118-2017: State Primary Standard of the Units of Volumetric and Mass Flow Rates of Gas. History of Creation and Confirmation of Calibration, and Measurement Capabilities

“…219/Sk-00), in which VNIIR actively participated with the several national metrological institutes (NMI) of Slovakia (SMU), Germany (PTB), Lithuania (LEI), Belarus (BelGim), Ukraine (GP IFSM), and Moldovia (NISM). The comparison was performed on two levels [4,5]: in the range of fl ow rates 0.12-10 m 3 /h (a set of fi ve membrane-type G6 MKM counters used as comparison instrument); in the range of fl ow rates 100-1000 m 3 /h (a DAE G650 axial turbine gas counter used as the comparison instrument.…”