Final Report on CCT-K7: Key comparison of water triple point cells

Abstract

The triple point of water serves to define the kelvin, the unit of thermodynamic temperature, in the International System of Units (SI). Furthermore, it is the most important fixed point of the International Temperature Scale of 1990 (ITS-90). Any uncertainty in the realization of the triple point of water contributes directly to the measurement uncertainty over the wide temperature range from 13.8033 K to 1234.93 K.The Consultative Committee for Thermometry (CCT) decided at its 21st meeting in 2001 to carry out a comparison of water triple point cells and charged the BIPM with its organization.Water triple point cells from 20 national metrology institutes were carried to the BIPM and were compared with highest accuracy with two reference cells. The small day-to-day changes of the reference cells were determined by a least-squares technique. Prior to the measurements at the BIPM, the transfer cells were compared with the corresponding national references and therefore also allow comparison of the national references of the water triple point.This report presents the results of this comparison and gives detailed information about the measurements made at the BIPM and in the participating laboratories. It was found that the transfer cells show a standard deviation of 50 µK; the difference between the extremes is 160 µK. The same spread is observed between the national references.The most important result of this work is that a correlation between the isotopic composition of the cell water and the triple point temperature was observed. To reduce the spread between different realizations, it is therefore proposed that the definition of the kelvin should refer to water of a specified isotopic composition.The CCT recommended to the International Committee of Weights and Measures (CIPM) to clarify the definition of the kelvin in the SI brochure by explicitly referring to water with the isotopic composition of Vienna Standard Mean Ocean Water (VSMOW). The CIPM accepted this recommendation and the next edition of the SI brochure will include this specification.Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.The final report has been peer-reviewed and approved for publication by the CCT, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

A determination of the molar gas constantRby acoustic thermometry in helium

“…Special care was taken for reaching adequate thermal equilibrium in the cell before taking data. The national standard for the triple point of water as maintained at INRiM is well characterized from international comparisons [56,57] with an estimated uncertainty of 20 K. The resistance values for each thermometer were corrected to account for the immersion depth in the cell, self heating and isotopic composition (table 7).…”

Measuring Systems for Thermometer Calibration in Low-Temperature Range

“…In order to create the direct reference to the CCT-K7 key comparison [4] for INTiBS, two water cellsIsotech No. 465 (with known isotopic composition) and UME 51-participated in the bilateral comparison at INRIM in Turin (EURAMET Project No.…”

Standard Platinum Resistance Thermometer Calibrations from the Ar TP to the Ag FP

“…Detailed information regarding these types of comparisons is given in Refs. [34,35,[52][53][54][55].…”